Top

România | Română

Produse
- - MANUAL
    Pistolete MIG/MAG
    Pistolete WIG
    Pistolete debitare cu plasmă
    Pistolete pentru sudare cu plasmă
  - ROBOTIC SYSTEMS
    Sisteme de pistolete pentru roboţi
    Periferice roboţi
    Sursă de sudare pentru robotizare
    Sistem Master-Feeder MFS-V3
    Senzori
    Laser
  - Tehnologie de extragere
    Sisteme pentru extragerea noxelor
    Pistolete cu extragerea noxelor
  - Accesorii
    Conectori
    Portelectrozi, portelectrozi crăițuire și electrozi crăițuire
    Accesorii și scule
    Unități de răcire și derulatoare
    Chimicale pentru sudare
    Electrozi Wolfram
  - Altele
    Fitness pentru sudori
  - Pistolete MIG/MAG
    MB EVO PRO
    MB EVO
    MB GRIP
    MB ERGO
    
    Push-Pull Plus
    
    RAB GRIP - cu absorbție de noxe
    RAB GRIP HE - cu absorbție de noxe
    
    ABIMIG^® A T LW
    ABIMIG^® A LW
    ABIMIG^® W T
    ABIMIG^® W
    Configurator
    
    ABIMIG^® GRIP W
    
    Pistolet pentru sudare cu sârmă cu autoprotecție
    
    Conectorul central
  - Pistolete WIG
    Seria SR
    ABITIG^® GRIP 9-26
    ABITIG^® GRIP 150 - 500
    ABITIG^® GRIP Little 9 - 24
    ABITIG^® GRIP Little 90 - 260
  - Pistolete debitare cu plasmă
    ABIPLAS^® CUT
    ABICUT
  - Pistolete pentru sudare cu plasmă
    ABIPLAS^® WELD
  - Sisteme de pistolete pentru roboţi
    MIG/MAG - WH / WH-PP A
    MIG/MAG - WH / WH-PP W
    MIG/MAG - ABIROB^® W
    MIG/MAG - ABIROB^® A
    MIG/MAG - ABIROB^® 350 GC
    MIG/MAG - ROBO Standard
    MIG/MAG - ROBO Compact W600
    MIG/MAG - TANDEM
    WIG - ABITIG^® WH
    WIG - ABITIG^® MT
    PLASMA - ABIPLAS^® WELD
    Pistolete pentru mecanizare ABIMIG^® SpinArc^®
  - Periferice roboţi
    ATS-Rotor
    Senzor de soc CAT3
    Senzor de soc iCAT
    Senzor de soc iCAT mini
    Montură robot iSTM
    Sistem de alimentare cu sârmă MasterLiner
    Stație de curățare BRS
    Stație schimbare gâturi TES
    Dispozitiv tăiere sârmă DAV
    Sistem de pulverizare TSi
    Dispozitiv aliniere și control gâturi
  - Sursă de sudare pentru robotizare
    Sursă de sudare iROB
  - Sistem Master-Feeder MFS-V3
    Sistem Master-Feeder MFS-V3
  - Senzori
    Sistem de management al gazului EWR 2 / EWR 2 Net
    Senzor pentru urmărirea rostului TH6D
    Senzor pentru urmărirea rostului TH6i
  - Laser
    Aplicații
    Optică pentru brazarea cu laser ALO1
    Optică pentru brazare și sudare cu laser ALO3
    Optică pentru călire cu laser RLH-A
    Optică pentru sudarea cu laser RLW-A
    Optică cu poziție focală stabilă BO-SF
    Optică BO
  - Sisteme pentru extragerea noxelor
    Sistem pentru extragerea noxelor xFUME VAC ADVANCED
    Sistem pentru extragerea noxelor xFUME VAC PRO
    Sistem pentru extragerea noxelor xFUME VAC FLEX
    
    Sisteme de extracție noxe FEC
    Sisteme de extracție noxe FES-200 & FES-200 W3
  - Pistolete cu extragerea noxelor
    RAB GRIP - cu absorbție de noxe
    RAB GRIP HE - cu absorbție de noxe
  - Conectori
    Conectori ABIPLUG pentru cablul de sudare
  - Portelectrozi, portelectrozi crăițuire și electrozi crăițuire
    Portelectrozi
    Portelectrozi craituire
    Portelectrozi crăițuire TEAM BINZEL® G 3000 / 4000
    Electrozi crăiţuire ABIARC
  - Accesorii și scule
    Accessories for professionals Professional accessories increase the performance and reliability of your torch. Ideally matched they form the basis for functional safety and a long service life.
    Show accessories
  - Unități de răcire și derulatoare
    Instalații de răcire CR 1000 / CR 1250
    Derulatoare alimentare cu sârmă rece ABIDRIVE V2
  - Chimicale pentru sudare
    Spray anti-stropi
    Pastă anti-stropi
    Lichide anti-stropi
    Lichide răcire
  - Electrozi Wolfram
    Esențiali pentru cele mai bune rezultate la sudare Pentru sudarea WIG, electrozii de wolfram nefuzibili şi rezistenți la temperatură, alături de pistolet, sursa de energie şi gazul inert, sunt un factor major pentru obținerea rezultatelor optime.
    Arată electrozi
  - Fitness pentru sudori
    Manual de fitness pentru sudori
    Fitness Exercises for Welders
Soluţii
- - Stainless steel
    Join securely – prevent corrosion Welding stainless steel is a special challenge. To create clean seams and permanently stable connections with minimal risk of corrosion it is important first of all to determine the stainless steel exactly. After this, the welding method and the welding process must be exactly aligned to this. Welding is usually carried out with TIG, MIG, MAG and manual metal arc welding methods.
    Show Material
  - Aluminium
    Long-lasting connections – outstanding visual appearance Aluminium is a lightweight and at the same time solid material that is used wherever stable components must not weigh very much. The material is used in alloys in aerospace, as well as in the construction of railway vehicle, motor vehicles and ships. TIG, plasma, MIG or even laser welding methods are used, depending on the specification and the thickness of the workpiece.
    Show Material
  - Structural steel
    Numerous types – infinite possibilities Structural steel is a generic term used for various steels that are processed in the steel and machine engineering industries. The steel is available as rods, profiles, pipes and sheet metal in a number of thicknesses and dimensions. Structural steel is usually easy to weld, durable when handled and suitable for all conventional welding procedures.
    Show Material
  - Special material
    Special properties – special applications Special materials have special properties and are suitable for special applications. There are highly durable, strong, light or resistant special materials for various requirements. These may be particularly resistant to chemical, thermal or mechanical loads. When selecting the right welding procedure for these materials it is important to know the precise material properties.
    Show Material
  - MIG (GMAW)
    Metal inert gas welding MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode and the material. The melting electrode supplies the additive material for forming the weld. MIG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
    Show Process
  - MAG (GMAW)
    Metal active gas welding MAG welding is a metal shielding gas welding process (GMAW) with active gas, in which the arc burns between a continuously fed melting wire electrode and the material. The melting wire electrode supplies the additive filler metal for forming the weld. MAG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
    Show Process
  - TIG (GTAW)
    Tungsten inert gas welding TIG welding is tungsten shielding gas welding process (GTAW) with inert gas, in which the arc burns between a non-melting tungsten electrode and the material. TIG welding can be used simply and economically on a variety of materials. Different shielding gases are used, depending on the requirement and the material.
    Show Process
  - Laser welding
    Laser beam welding Laser beam welding - in brief: laser welding - is a beam welding process that is used to join metals. The heat required to connect the parts is generated by the laser beam which is focussed onto the weld. Laser welding is a very fast and efficient welding process that is highly suited for automated processes.
    Show Process
  - Plasma welding (PAW)
    Tungsten plasma welding / Plasma metal inert gas welding Plasma welding is a shielding gas welding process with inert gas and a further development of the TIG welding procedure. Here, the arc burns between a non-melting electrode and the material. The plasma beam, which is used as a heat source, is created by a high supply of energy that makes the shielding gas electrically conductive. The arc is constricted and thereby reaches a higher energy density than during TIG welding. Plasma welding is suitable for all electrically conductive materials.
    Show Process
  - Plasma cutting
    Plasma arc cutting Plasma cutting is a arc cutting process in which the arc burns between a non-melting electrode and the material. The heat source is a beam of very hot electrically conductive gas, the so-called plasma beam. Plasma cutting is suitable for all electrically conductive materials. Various cutting gases are used in plasma cutting depending on the requirement and material.
    Show Process
  - Manual metal arc welding (MMAW)
    Arc electrode welding Manual metal arc welding is a metal arc welding process (MMAW) in which an electrical arc burns between a sheathed rod electrode and the material. No shielding gas is used in manual metal arc welding. The sheathed melting electrode forms a shielding gas to protect the smelt and supplies additives to create the required seam. Manual metal arc welding can be used on nearly all materials suitable for welding, simply and efficiently. Shielding gas is not supplied but is created – depending on the requirement and material – when the electrode sheath melts. The procedure is also used in small and medium-sized businesses and when building ships, pipelines as well as steel constructions and bridges outdoors.
    Show Process
  - Manual
    Join securely – work effectively Manual welding, or welding by hand, is among the most demanding and stressful activities in metal construction. To join materials securely welders frequently have to work for longer periods in so-called constrained positions. To make this possible over a longer period a welding torch is needed that relieves the welder and provides optimal support during work.
    Show Main Focus
  - Automated
    Welding evenly – working economically With recurring welding jobs automated welding ensures fast processes, constant high welding quality and, if planned correctly, short amortisation periods. Thanks to technological progress in recent years, automated welding offers clear advantages in comparison with manual welding to SMEs as well. Automated welding can also be realised with different methods.
    Show Main Focus
  - Thin sheet welding
    Ensuring stability – avoiding thermal distortion Welding thin plates up to 3 mm thick is one of the most complex joining tasks. The aim is to create a stable connection despite the thin material gauge. To prevent distortion of the metal plate and time-consuming reworking, as little heat as possible needs to be generated on the work surface. This requires lots of experience, finesse and welding equipment that is capable of working precisely in every situation.
    Show Main Focus
  - Thick plate welding
    More efficient welding – improving quality Joining thick steel plates like those used to build ships and machines is one of the most complex and difficult welding tasks, and often large tolerance differences and gaps need to be compensated. All parts require careful preparation to ensure permanently stable connections. Also, the required result is often only achieved after several welding processes.
    Show Main Focus
  - Welding large parts
    Wide welds – long distances Using optimised welding equipment is essential when welding large parts because the wide welds on the parts, which are usually subject to heavy loads, must remain permanently stable and securely attached. Also, large distances often need to be bridged between the power source and the welding point. The wire and gas supplies need to work reliably and all parameters and various welding programs must be retrievable, if possible by remote control.
    Show Main Focus
  - Health
    Reducing strain – preventing tension Welding can impact on health, which is why there is a series of statutory prevention regulations governing released gases and vapours, extreme light and high temperatures. These include the use of extractor systems, mobile extractor devices, fume extraction torches and personal protective equipment. As a leading welding equipment partner, ABICOR BINZEL wants to help welders to reduce the physical stress associated with welding.
    Show Main Focus
  - Research and development
    Using the test laboratory – driving innovations ABICOR BINZEL is one of the quality and innovation leaders for welding torches and has made a decisive contribution to shaping the world of welding over many years. ABICOR BINZEL is particularly concerned with continuously improving products, relieving the strain on welders, researching into new processes and supporting automated welding with the objective of developing efficiency-enhancing joining technology solutions. For this reason, developers in the ARClab test laboratory work daily on optimising product solutions and testing new products thoroughly.
    Show Main Focus
  - Process development
    Utilise competence – optimise processes ABICOR BINZEL has been a leading specialist for welding technology for over 60 years and works with very different companies, institutes and research institutes. In the Innovation and Technology Centre (ITC) experts from ABICOR BINZEL are available with their whole experience to manufacturing companies across the whole spectrum of industry. They advise and support these companies in developing and optimising their joining technology processes and help them to make their production more economic, more efficient and better.
    Show Main Focus
References
- - BOMAG GmbH, Boppard, Germany
    BOMAG GmbH, Boppard, Germany Testing the MB EVO PRO: lighter, more flexible and cooler BOMAG specialises in machines for compacting earth, asphalt and waste. The global market leader based in Boppard at the Rhein river has around 2500 employees worldwide. ABICOR BINZEL welding torches have been used here for over 30 years for demanding welding tasks in steel construction work. In test operations over several weeks, the new air- and liquid-cooled MB EVO PRO welding torches convinced welders and those responsible straight away.
    Show Reference
  - CRIST Offshore Sp. zo.o., Gdynia, Poland
    The specialist for offshore constructions and platforms The CRIST shipyard in Gdynia has the longest dry-dock in Poland and specialises in building giant constructions and ships for the offshore sector. About 150 people work in the shipyard's offshore sector. The company has relied on ABICOR BINZEL's flexible welding torches for many years.
    Show Reference
  - E & F Metall- und Rohrleitungsbau GmbH, Föhren, Germany
    Stainless and steel – for the highest demands E & F is an experienced specialist for metal constructions and pipelines in the foodstuffs and pharmaceutical industries, as well as in other sectors with high quality demands. Over 80 welders work for the company worldwide. Following an intensive test phase, E & F has converted its welding torches to product solutions from ABICOR BINZEL.
    Show Reference
  - Kranbau Köthen GmbH, Köthen, Germany
    We take a load off you Kranbau Köthen GmbH develops and manufactures individual special, process and automatic cranes. The company was founded in 1934, has around 250 employees and supplies customers all over the world. As a long-term industrial user, Kranbau Köthen also supports ABICOR BINZEL in developing and testing new products and technologies.
    Show Reference
  - Remontowa Shipbuilding SA, Danzig, Poland
    Ship conversion and shipbuilding with the highest standards The Remontowa shipyard in Gdansk is one of the leading shipyards for ship conversions in Europe. The company was founded in 1952 and carries out over 200 ship repairs and conversions annually. Following a convincing test, the shipyard now uses ABIMIG^® A T LW torches from ABICOR BINZEL for all its welding work.
    Show Reference
  - SAMSON AG, Frankfurt, Germany
    Valves for measurement and control technology SAMSON AG is one of the world's leading appliance manufacturers for measurement and control technology. The company stands for quality technical workmanship, entrepreneurial continuity and great innovative capabilities. In order to realise different manual and automated welding work securely in the desired quality, Samson AG relies on welding torches from ABICOR BINZEL.
    Show Reference
  - Gdansk Shipyard SA, Danzig, Poland
    Shipbuilders with a long tradition The tradition-steeped Gdansk Shipyard counts flexibility and versatility among its strengths. It demands both from its workforce and their tools. The shipyard relies on welding torches from ABICOR BINZEL to enable its welders to carry out their work optimally.
    Show Reference
  - Bronpi Calefacción, Lucena, Spain
    100% tightness for comfortable warmth Bronpi Calefacción, based in Lucena, southern Spain, develops and manufactures high-quality fire places, wood burning stoves and pellet heating systems. The company was founded in 1985 and has over 200 employees. Along with Spain, the main sales markets are above all England and other European countries. Bronpi relies completely on ABICOR BINZEL products for welding technology.
    Show Reference
  - Gosan S.A., Bilbao, Spain
    Gosan products lift the world Since 1971 Gosan has supplied mechanical components for lifting, conveying and storage systems all over the world. The market leader focusses on customised welded sheaves for lifting heavy loads. To ensure that all quality and safety requirements are fulfilled, Gosan uses technology from ABICOR BINZEL for automated and hand welding work.
    Show Reference
  - Stahl Maschinenbau GmbH & Co. KG, Perkam, Germany
    Reliable series production of hydraulic tanks Stahl Maschinenbau in Perkam, Bavaria, specialises in the development and production of hydraulic and diesel tanks for construction machines, cranes and industrial lifts. The company meets the high standards for quality and series production among other things through the use of robot welding technology from ABICOR BINZEL.
    Show Reference
  - WP Performance Systems, Munderfing, Austria
    World-class welding WP Performance Systems has already won over 300 world championships. Because in motorcycle racing there's hardly a single professional who does not use frames from the Austrian manufacturer. High-end chassis from WP are regularly found among the leaders both off-road and in road races. One reason: their high quality, which is enabled as well with the help of ABICOR BINZEL welding technology.
    Show Reference
INDUSTRII
- - INDUSTRII
    Industria constructoare de maşini şi de transport
    Producţia generală
    Industria construcţiilor navale şi offshore
    Construcţii
    Construcţia de maşini pentru industria grea
    Industria energetică
    Tehnologii moderne
  - Industria constructoare de maşini şi de transport
    Aspect perfect – siguranţă maximă şi stabilitate Cordoanele de sudură trebuie să îndeplinească cerințele cele mai ridicate în industria constructoare de maşini şi de transport. În funcție de domeniul de aplicare, accentul se pune pe durata oboseală, siguranță și aspect. Foi groase de tablă sunt folosite pentru rame de șasiu, foi subțiri și tablă de aluminiu pentru componente ușoare de construcție, oțeluri cu rezistență ridicată și fără deformații pentru compartimentele destinate pasagerilor. ABICOR BINZEL oferă producătorilor de vehicule și furnizorilor lor o gamă completă de soluții tehnologice de asamblare pentru procesele de sudare manuale, semi-mecanizate și automatizate.
    MAI MULTE
  - Producţia generală
    Diversitate de materiale – procese de sudare adaptate De la conducte, la scaune de birou și de la ATM-uri la roller-coastere – aproape nimic nu funcționează fără tehnologie de sudare. Cerințele pentru sudori, procesele și echipamentele sunt la fel de variate ca și gama de aplicații. Materialul cu caracteristicile sale speciale este factorul decisiv pentru procesul de sudare. ABICOR BINZEL oferă soluții tehnologice optime de asamblare pentru aproape toate materialele și sarcinile de sudare - manuală, mecanizată sau automatizată.
    MAI MULTE
  - Industria construcţiilor navale şi offshore
    Cerinţe solide – sarcini de sudare variate În industria construcțiilor navale și offshore, cele mai ridicate cerințe sunt îndreptate către sudori și echipamente. Efectele vântului și ale vremii trebuie luate în considerare, la fel de bine ca și caracteristicile speciale ale tablelor grunduite, lipsa deformării segmentelor mari și a finisajelor sudurilor ce trebuie vopsite. Sudorii lucrează adesea în spații strâmte, precum și în poziții dificile, cu multe schimbări de poziție și trebuie să acopere distanțe mari. ABICOR BINZEL oferă soluții personalizate pentru sudarea manuală și sudarea semi-mecanizată, precum și sudarea robotizată.
    MAI MULTE
  - Construcţii
    Conexiuni stabile – soluţii semi-mecanizate Sudarea în industria construcțiilor înseamnă adesea îmbinarea oțelului structural simplu sau galvanizat și aluminiului. Sudarea este executată, de exemplu, în hala de producție, pe șantier, în puţul ascensorului sau pe pod. Procedura de sudare este selectată în funcție de material și de aplicație. În cazul sudării manuale, este importantă tehnologia ușoară și ergonomică a pistoletului. Sudarea mecanizată și automatizată, de exemplu în prefabricare, impune cerințe speciale în tehnologia de sudare.
    MAI MULTE
  - Construcţia de maşini pentru industria grea
    Sarcini de sudură exigente – echipamente speciale În industria construcţiilor de utilaje grele sunt necesare echipamente de sudare de mare putere şi flexibile, care să vină în ajutorul sudorilor cât mai eficient în timpul lucrului. În aceste situaţii este adeseori nevoie să se sudeze manual componente cu pereţi groşi, greu accesibile din poziţii dificile. Legăturile sudate trebuie să fie extrem de rezistente şi să corespundă cerinţelor stricte. ABICOR BINZEL oferă o gamă largă de arzătoare standard şi speciale ultraperformante, pentru sudarea manuală şi semi-mecanizată cât şi soluţii speciale pentru sudarea automatizată, de exemplu pentru producţia în serie a subansamblurilor.
    MAI MULTE
  - Industria energetică
    Sarcini extreme – soluţii speciale de sudare Conducte și rezervoare, mori eoliene și turbine, colectoare solare și instalații de incinerare a deşeurilor: industria energetică și a construcţiei aparatelor prezintă multe aspecte. Cele mai multe dintre ele necesită suduri robuste și sigure. Pe lângă oțeluri, trebuie sudate frecvent materiale speciale care îndeplinesc cerințe exigente privind stabilitatea și siguranța. ABICOR BINZEL oferă o paletă largă de echipamente de sudare performante și ergonomice pentru operaţiunile de sudare de tip manual, semi-mecanizat și automatizat.
    MAI MULTE
  - Tehnologii moderne
    Realizarea tendinţelor majore – folosirea tehnicilor de asamblare inovatoare Multe realizări tehnologice au efect asupra tehnicii de asamblare. Procesele de fabricare generatoare sau aditive cu componente metalice necesită utilizarea unor echipamente de sudare speciale. În cazul producţiei de rezervoare pentru vehiculele electrice, sunt necesare proceduri speciale de lipire cu laser și de asamblare specială în domeniile micro și macro. ABICOR BINZEL oferă soluții potrivite pentru producția semi-mecanizată și automatizată cu ajutorul tehnicilor de asamblare inovatoare, oțeluri convenționale și diferite materiale speciale.
    MAI MULTE
Service
- - Download Center
    Cataloage
    Instrucțiuni de exploatare
    Fișă de instrucțiuni
    Fișe cu date de siguranță
    Declarații de conformitate
  - Media
    Magazine WELDER'S WORLD
  - Cataloage
    Cataloage
    Spare Parts Lists
    Torch overviews
    Brochures
  - Instrucțiuni de exploatare
    Manual
    ROBOTIC SYSTEMS
    Accesorii
    Documente generale
  - Fișă de instrucțiuni
    Manual
    ROBOTIC SYSTEMS
    Accesorii
  - Fișe cu date de siguranță
    Welding chemicals
    Electrozi Wolfram
    Electrozi crăiţuire
  - Declarații de conformitate
    Manual
    ROBOTIC SYSTEMS
    Accesorii
  - Magazine WELDER'S WORLD