MIG/MAG Welding Torches MB EVO
MB EVO. The classic line …
The MB EVO torch series stands for a completely new handling concept that goes down new roads with regard to form and function. The welding torch forms a strong unit together with the welder‘s hand. The unique ergonomics as interplay between handle, trigger position, trigger design and ball joint construction guarantees a good feeling for welding in all working positions as well as the best results.
MIG/MAG Welding Torches MB EVO, air cooled:
- Genuine two-component handle – robust and ergonomical
- Optimum trigger position and tapered handle design – for precise and safe handling
- Special internal geometry with air cooled torches – for “cool” handles and maximum mechanical strength
- Proven “MB” wearing part concept – for a long service life
- Solid, size-optimised central connector
MIG/MAG Welding Torches MB EVO, liquid cooled:
- Genuine two-component handle – robust and ergonomical
- Proven “MB” wearing part concept and media hoses
- Optimum trigger position, tapered handle design and sophisticated ball joint construction – for best handling in all welding positions
- Easy to repair construction down to the last detail – best space conditions for the simplest maintenance measures
- Solid, size-optimised central connector with protected hose guide
MIG/MAG Welding Torches MB EVO, air cooled
Technical data (EN 60 974-7):
| Type: | MB EVO 15 |
MB EVO 24 |
MB EVO 25 | MB EVO 26 | MB EVO 36 |
| Rating | |||||
| CO2: | 180 A / 150 A | 250 A | 230 A | 270 A | 320 A |
| Mixed gases M21*: | 180 A / 150 A | 220 A | 200 A | 240 A | 290 A |
| Duty Cycle (%): | 35 / 60 | 60 | 60 | 60 | 60 |
| Wire Ø (mm): | 0.6 - 1.0 | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 |
* according to DIN EN ISO 14175
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%.
MIG/MAG Welding Torches MB EVO, liquid cooled
Technical data (EN 60 974-7):
| Type: | MB EVO 240 D | MB EVO 401 |
MB EVO 401 D |
MB EVO 501 | MB EVO 501 D |
| Rating | |||||
| CO2: | 300 A | 450 A | 400 A | 550 A | 500 A |
| Mixed gases M21*: | 270 A | 400 A | 350 A | 500 A | 450 A |
| Duty Cycle (%): | 100 | 100 | 100 | 100 | 100 |
| Wire Ø (mm): | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 | 1.0 - 1.6 | 1.0 - 1.6 |
* according to DIN EN ISO 14175
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%. Recommended cooling capacity of water recirculator approx. 800 W. To protect cable assembly components from excessive heat build up we recommend a post welding cooling cycle of at least four minutes.