Maintenance and Cleaning
Regular maintenance and cleaning are prerequisites for a long service life and perfect function. The regular removal of dust can extend the service life of the filter cartridges. The maintenance interval is determined by the working environment and operating time of the devices. If the device is operated for longer than 8 hours per day, the maintenance interval should be adapted according to requirements.
WARNING
Health risk due to inhalation of harmful welding and grinding fumes
Welding and grinding processes produce fumes containing harmful dust particles that can settle on surfaces and be released into the ambient air. They can damage the respiratory system when inhaled.
- Check and wear your personal protective equipment.
- b) Only use the device in rooms which are sufficiently ventilated.
- c) Make sure that all the seals on the device are free of dirt.
- d) After cleaning and maintenance work check all screwed joints for a tight fit, leaks, chafing points. Tighten any loosened screwed joints. Correct any faults found immediately.
- e) Remove dust deposits in the surrounding area immediately using an industrial vacuum cleaner of dust class H or a damp cloth.
WARNING
Electric shock due to damaged or improperly installed cable
The use of damaged or improperly installed cables may result in a potentially fatal electric shock.
- Check all live cables and connections for proper installation and damage.
- Have any damaged, deformed, or worn parts replaced by a qualified electrician only.
CAUTION
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can start running unexpectedly and lead to injuries from cuts.
- Switch off the device.
- Disconnect all electrical connections.