Designated use
The unit is used to extract fumes and dust that result from welding, grinding, and thermal cutting processes. The unit can be used for extraction during welding, grinding or cutting steel with a nickel and chrome alloy content less than 30 %.
The unit must not be used for extracting welding fumes that contain CMR substances.
The device may be used only for the purpose and in the manner described in this documentation. Any other use is considered non-intended. Unauthorized conversion work or modifications to increase performance are not permissible.
Only operate the unit with original ABICOR BINZEL spare parts.
Do not exceed the maximum load data given in the documents. Excess loads will lead to irreparable damage.
Do not make constructional changes to the unit.
Do not use or store the unit in wet conditions.
Only use the unit outdoors when sufficiently protected against the influences of the weather.
Note that the volume flow routed back into the workspace must not exceed 50 % of the supply air to the installation room. With free room ventilation, a supply air flow of one times the room volume per hour can be assumed. This means an air exchange rate of one per hour (supply air flow [m³/h] = Room volume [m³] × air exchange rate [1/h]).
Check the extraction hoses for damage and soiling at regular intervals, but at least once every week.