Transport, installation, and storage
Risk of injury due to improper transport and installation Improper transport and installation can cause the device to tip or fall over. This may result in serious injuries. Check and wear your personal protective equipment. Note the weight of the device when lifting it. Use an appropriate lifting tool with load handling attachment for transporting and installing the device. Transport the device only by the handle. Transport the device only over even ground. Watch out for obstacles. Avoid abrupt lifting and setting down. Do not lift the device over persons or other devices. Place the device on a suitable base (flat, solid, dry) on which it will not topple over. Send bystanders out of the danger zone. |
Risk of material damage due to improper transport, installation, and storage Improper transport, installation, or packaging can result in damage to the device. This can result in material damage and irreparable damage to the device. Protect the device against weather conditions, such as rain and direct sunlight. Use the device only in dry, clean and well-ventilated rooms. Pack the device before transportation/storage per Figure. |
Physical storage conditions in a closed environment:
Ambient conditions for transport, storage and operation
The device is delivered in a trolley and separated into two levels as follows:
The trolley is equipped with a pressure-relief screw. This automatically equalizes the low pressure inside the trolley caused by air transport.