Plasma Cutting Torches ABIPLAS® CUT
Plasma Cutting Torches ABIPLAS® CUT
Torches in the ABIPLAS® CUT series can be used for plasma cutting with compressed air as the plasma and cooling gas in all common cutting positions.
Thanks to a large selection of plasma nozzles, electrodes and accessory parts, ABICOR BINZEL plasma cutting torches are suitable for individual continual use even under the toughest of conditions. Special torches are available for automated applications.
Arguments speaking for themselves:
- Robust design and optimum cooling guarantee long torch and consumable life
- Handle with extended trigger offering increased distance between plasma jet and hand facilitating safer and fatigue free working
- Quickly exchangeable consumables (including insulator) – easy handling
- Large range of consumables, equipment and accessories – for all cutting tasks
Plasma Cutting Torches ABIPLAS® CUT, air cooled
Technical data (EN 60 974-7):
| Type: | ABIPLAS® CUT 70 / 70 MT |
ABIPLAS® CUT 110 / 110 MT |
ABIPLAS® CUT 150 / 150 MT |
| Type of cooling: | air cooled | air cooled | air cooled |
| Pilot current: | 15 - 22 A (max. 25 A) |
15 - 25 A (max. 27 A) |
15 - 27 A (max. 29 A) |
| Rating: | 70 A (at 60 % DC) 50 A (at 100 % DC) |
110 A (at 60 % DC) 90 A (at 100 % DC) |
150 A (at 60 % DC) 120 A (at 100 % DC) |
| Type of gas: | Compressed air | Compressed air | Compressed air |
| Gas flow: | approx. 155 l/min. | approx. 180 l/min. | approx. 235 l/min. |
| Working pressure: | 5 - 5.5 bar | 5 - 5.5 bar | 5 - 5.5 bar |
| Air value defined with nozzle size: | 1.1 mm | 1.4 mm | 1.8 mm |
| − Plasma air: | approx. 22 l/min. | approx. 30 l/min. | approx. 39 l/min. |
| − Soft start air: | ≥ 12 l/min. | ≥ 15 l/min. | ≥ 15 l/min. |
| Gas post flow: | ≥ 60 sec. | ≥ 60 sec. | ≥ 60 sec. |
| Type of ignition: | HF | HF | HF |
| Gas supply: | Compressed air both for plasma and cooling gas | Compressed air both for plasma and cooling gas | Compressed air both for plasma and cooling gas |
| Ignition voltage: | 7 kV | 7 kV | 7 kV |
| Cutting thickness: | max. 25 mm at 70 A depending on material to be cut and power source |
max. 40 mm at 110 A depending on material to be cut and power source |
max. 55 mm at 150 A depending on material to be cut and power source |
Plasma Cutting Torches ABIPLAS® CUT, liquid cooled
Technical data (EN 60 974-7):
| Type: | ABIPLAS® CUT 200 W / 200 W MT Wear parts standard |
ABIPLAS® CUT 200 W / 200 W MT Wear parts special |
| Type of cooling: | liquid cooled | liquid cooled |
| Pilot current: | 15 - 27 A (max. 29 A) |
15 - 27 A (max. 29 A) |
| Rating: | 200 A (at 100 % DC) |
160 A (at 100 % DC) |
| Type of gas: | Compressed air | Compressed air |
| Working pressure: | 3.5 - 4.5 bar | 3.5 bar |
| Air value defined with nozzle size: | 1.8 mm | 1.8 mm |
| − Plasma air: | approx. 39 l/min. | approx. 21 l/min. |
| − Soft start air: | ≥ 15 l/min. | ≥ 15 l/min. |
| Gas post flow: | ≥ 20 sec. | ≥ 20 sec. |
| Type of ignition: | HF | HF |
| Gas supply: | Compressed air for plasma gas | Compressed air for plasma gas |
| Ignition voltage: | 7 kV | 7 kV |
| Cutting thickness: | max. 70 mm at 200 A depending on material to be cut and power source |
max. 60 mm at 160 A depending on material to be cut and power source |
