Sverige | Svenska

Produkter
- - Manual
    MIG/MAG Svetspistol
    TIG Svetspistol
    Plasma Skär Svetspistol
    Plasma Svetspistol
  - ROBOTIC SYSTEMS
    Robot Svetspistol
    Robot kringutrustning
    Robotströmkälla
    Trådmatningssystem
    Sensorer
    Laser
  - Tillbehör
    Uttag och kontakter
    Elektrodhållare, kolbågsbrännare och kolbågselektroder
    Verktyg
    Rökutsugssystem och kylaggregat
    Svetskemikalier
    Volframelektroder
  - Övrigt
    Fitness för svetsare
  - MIG/MAG Svetspistol
    MIG/MAG Svetspistol MB EVO PRO
    MIG/MAG Svetspistol MB EVO
    MIG/MAG Svetspistol MB GRIP
    MIG/MAG Svetspistol MB ERGO
    MIG/MAG Svetspistol Push-Pull Plus
    MIG/MAG RAB GRIP Rökutsugspistol
    MIG/MAG RAB GRIP HE Rökutsugspistol
    MIG/MAG Svetspistol ABIMIG^® A T LW
    MIG/MAG Svetspistol ABIMIG^® A LW
    MIG/MAG Svetspistol ABIMIG^® W T
    MIG/MAG Svetspistol ABIMIG^® W
    MIG/MAG Svetspistol ABIMIG^® GRIP W
    Gaslös- rörtrådssvetspistol ALPHA FLUX 350
    Centraladapter-system
    Konfigurator
  - TIG Svetspistol
    TIG Svetspistol SR
    TIG Svetspistol ABITIG^® GRIP 9 - 26
    TIG Svetspistol ABITIG^® GRIP 150 - 500
    TIG Svetspistol ABITIG^® GRIP Little 9 - 24
    TIG Svetspistol ABITIG^® GRIP Little 90 - 260
  - Plasma Skär Svetspistol
    ABIPLAS^® CUT
    ABICUT
    PSB
  - Plasma Svetspistol
    ABIPLAS^® WELD
  - Robot Svetspistol
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP A
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP W
    MIG/MAG Svetspistolsystemet ABIROB^® W
    MIG/MAG Svetspistolsystemet ABIROB^® A
    MIG/MAG Svetsbrännarsystem ABIROB^® 350 GC
    MIG/MAG Svetspistolsystem ROBO Standard
    MIG/MAG Svetspistolsystem ROBO Compact W600
    MIG/MAG Svetspistolsystem TANDEM
    TIG Svetsbrännarsystem ABITIG^® WH
    TIG Svetsbrännarsystem ABITIG^® MT
    PLASMA Svetsbrännarsystem ABIPLAS^® WELD
    Maskinpistol ABIMIG^® SpinArc^®
  - Robot kringutrustning
    ATS-Rotor
    Robot Brytfäste CAT3
    Robot Brytfäste iCAT
    Robot Brytfäste iCAT mini
    Robot Brytfäste iSTM
    Trådmatningssystem MasterLiner
    Brännarrengöringsstation BRS
    Brännarväxelstation TES
    Trådklippstation DAV
    Injektionsenhet TSi
    Testjig
  - Robotströmkälla
    Robotströmkälla iROB
  - Trådmatningssystem
    Master-Feeder-System MFS-V3
  - Sensorer
    Gashanteringssystem EWR 2 / EWR 2 Net
    Fogspårningssensor TH6D
    Fogspårningssensor TH6i
  - Laser
    Tillämpningar
    Optik för laserlödning ALO1
    Optik för laserlödning och -svetsning ALO3
    Optik för remote laserhärdning RLH-A
    Optik för remote-lasersvetsning RLW-A
    Optik med stabilt fokusläge BO-SF
    Optik BO
  - Uttag och kontakter
    Welding cable connector system ABIPLUG
  - Elektrodhållare, kolbågsbrännare och kolbågselektroder
    Electrode holders DE 2200 / 2300 / 2400 / 2500
    Gouging Torch K10 / K12 / K12 T / K 16 / K16 T
    Gouging Torch TEAM BINZEL^® G 3000 / G 4000
    Mejslingselektroder ABIARC
  - Verktyg
    Accessories for professionals
    Professional accessories increase the performance and reliability of your torch. Ideally matched they form the basis for functional safety and a long service life.
  - Rökutsugssystem och kylaggregat
    Rökutsugssystem FES-200 & FES-200 W3
    Rökutsugssystem FEC
    Kylaggregat CR 1000 / CR 1250
    Kylaggregat ABIDRIVE V2
  - Svetskemikalier
    Anti-spatter sprays
    Anti-spatter pastes
    Anti-spatter liquids
    Coolant liquids
  - Volframelektroder
    For best welding results
    For tungsten inert gas welding (TIG), the non-fusing and temperature resistant tungsten electrode, in addition to the torch, the energy source and the inert gas, is a major factor for obtaining optimum results.
  - Fitness för svetsare
    Fitnessmanual för svetsaren
    Fitness Exercises for Welders
Lösningar
- - MIG/MAG Svetspistol
    MIG/MAG Svetspistol MB EVO PRO
    MIG/MAG Svetspistol MB EVO
    MIG/MAG Svetspistol MB GRIP
    MIG/MAG Svetspistol MB ERGO
    MIG/MAG Svetspistol Push-Pull Plus
    MIG/MAG RAB GRIP Rökutsugspistol
    MIG/MAG RAB GRIP HE Rökutsugspistol
    MIG/MAG Svetspistol ABIMIG^® A T LW
    MIG/MAG Svetspistol ABIMIG^® A LW
    MIG/MAG Svetspistol ABIMIG^® W T
    MIG/MAG Svetspistol ABIMIG^® W
    MIG/MAG Svetspistol ABIMIG^® GRIP W
    Gaslös- rörtrådssvetspistol ALPHA FLUX 350
    Centraladapter-system
    Konfigurator
  - TIG Svetspistol
    TIG Svetspistol SR
    TIG Svetspistol ABITIG^® GRIP 9 - 26
    TIG Svetspistol ABITIG^® GRIP 150 - 500
    TIG Svetspistol ABITIG^® GRIP Little 9 - 24
    TIG Svetspistol ABITIG^® GRIP Little 90 - 260
  - Plasma Skär Svetspistol
    ABIPLAS^® CUT
    ABICUT
    PSB
  - Plasma Svetspistol
    ABIPLAS^® WELD
  - Robot Svetspistol
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP A
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP W
    MIG/MAG Svetspistolsystemet ABIROB^® W
    MIG/MAG Svetspistolsystemet ABIROB^® A
    MIG/MAG Svetsbrännarsystem ABIROB^® 350 GC
    MIG/MAG Svetspistolsystem ROBO Standard
    MIG/MAG Svetspistolsystem ROBO Compact W600
    MIG/MAG Svetspistolsystem TANDEM
    TIG Svetsbrännarsystem ABITIG^® WH
    TIG Svetsbrännarsystem ABITIG^® MT
    PLASMA Svetsbrännarsystem ABIPLAS^® WELD
    Maskinpistol ABIMIG^® SpinArc^®
  - Robot kringutrustning
    ATS-Rotor
    Robot Brytfäste CAT3
    Robot Brytfäste iCAT
    Robot Brytfäste iCAT mini
    Robot Brytfäste iSTM
    Trådmatningssystem MasterLiner
    Brännarrengöringsstation BRS
    Brännarväxelstation TES
    Trådklippstation DAV
    Injektionsenhet TSi
    Testjig
  - Robotströmkälla
    Robotströmkälla iROB
  - Trådmatningssystem
    Master-Feeder-System MFS-V3
  - Sensorer
    Gashanteringssystem EWR 2 / EWR 2 Net
    Fogspårningssensor TH6D
    Fogspårningssensor TH6i
  - Laser
    Tillämpningar
    Optik för laserlödning ALO1
    Optik för laserlödning och -svetsning ALO3
    Optik för remote laserhärdning RLH-A
    Optik för remote-lasersvetsning RLW-A
    Optik med stabilt fokusläge BO-SF
    Optik BO
  - Uttag och kontakter
    Welding cable connector system ABIPLUG
  - Elektrodhållare, kolbågsbrännare och kolbågselektroder
    Electrode holders DE 2200 / 2300 / 2400 / 2500
    Gouging Torch K10 / K12 / K12 T / K 16 / K16 T
    Gouging Torch TEAM BINZEL^® G 3000 / G 4000
    Mejslingselektroder ABIARC
  - Verktyg
    Accessories for professionals
    Professional accessories increase the performance and reliability of your torch. Ideally matched they form the basis for functional safety and a long service life.
  - Rökutsugssystem och kylaggregat
    Rökutsugssystem FES-200 & FES-200 W3
    Rökutsugssystem FEC
    Kylaggregat CR 1000 / CR 1250
    Kylaggregat ABIDRIVE V2
  - Svetskemikalier
    Anti-spatter sprays
    Anti-spatter pastes
    Anti-spatter liquids
    Coolant liquids
  - Volframelektroder
    For best welding results
    For tungsten inert gas welding (TIG), the non-fusing and temperature resistant tungsten electrode, in addition to the torch, the energy source and the inert gas, is a major factor for obtaining optimum results.
  - Fitness för svetsare
    Fitnessmanual för svetsaren
    Fitness Exercises for Welders
  - Stainless steel
    Join securely – prevent corrosion
    Welding stainless steel is a special challenge. To create clean seams and permanently stable connections with minimal risk of corrosion it is important first of all to determine the stainless steel exactly. After this, the welding method and the welding process must be exactly aligned to this. Welding is usually carried out with TIG, MIG, MAG and manual metal arc welding methods.
  - Aluminium
    Long-lasting connections – outstanding visual appearance
    Aluminium is a lightweight and at the same time solid material that is used wherever stable components must not weigh very much. The material is used in alloys in aerospace, as well as in the construction of railway vehicle, motor vehicles and ships. TIG, plasma, MIG or even laser welding methods are used, depending on the specification and the thickness of the workpiece.
  - Structural steel
    Numerous types – infinite possibilities
    Structural steel is a generic term used for various steels that are processed in the steel and machine engineering industries. The steel is available as rods, profiles, pipes and sheet metal in a number of thicknesses and dimensions. Structural steel is usually easy to weld, durable when handled and suitable for all conventional welding procedures.
  - Special material
    Special properties – special applications
    Special materials have special properties and are suitable for special applications. There are highly durable, strong, light or resistant special materials for various requirements. These may be particularly resistant to chemical, thermal or mechanical loads. When selecting the right welding procedure for these materials it is important to know the precise material properties.
  - MIG (GMAW)
    Metal inert gas welding
    MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode and the material. The melting electrode supplies the additive material for forming the weld. MIG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - MAG (GMAW)
    Metal active gas welding
    MAG welding is a metal shielding gas welding process (GMAW) with active gas, in which the arc burns between a continuously fed melting wire electrode and the material. The melting wire electrode supplies the additive filler metal for forming the weld. MAG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - TIG (GTAW)
    Tungsten inert gas welding
    TIG welding is tungsten shielding gas welding process (GTAW) with inert gas, in which the arc burns between a non-melting tungsten electrode and the material. TIG welding can be used simply and economically on a variety of materials. Different shielding gases are used, depending on the requirement and the material.
  - Laser welding
    Laser beam welding
    Laser beam welding - in brief: laser welding - is a beam welding process that is used to join metals. The heat required to connect the parts is generated by the laser beam which is focussed onto the weld. Laser welding is a very fast and efficient welding process that is highly suited for automated processes.
  - Plasma welding (PAW)
    Tungsten plasma welding / Plasma metal inert gas welding
    Plasma welding is a shielding gas welding process with inert gas and a further development of the TIG welding procedure. Here, the arc burns between a non-melting electrode and the material. The plasma beam, which is used as a heat source, is created by a high supply of energy that makes the shielding gas electrically conductive. The arc is constricted and thereby reaches a higher energy density than during TIG welding. Plasma welding is suitable for all electrically conductive materials.
  - Plasma cutting
    Plasma arc cutting
    Plasma cutting is a arc cutting process in which the arc burns between a non-melting electrode and the material. The heat source is a beam of very hot electrically conductive gas, the so-called plasma beam. Plasma cutting is suitable for all electrically conductive materials. Various cutting gases are used in plasma cutting depending on the requirement and material.
  - Manual metal arc welding (MMAW)
    Arc electrode welding
    Manual metal arc welding is a metal arc welding process (MMAW) in which an electrical arc burns between a sheathed rod electrode and the material. No shielding gas is used in manual metal arc welding. The sheathed melting electrode forms a shielding gas to protect the smelt and supplies additives to create the required seam. Manual metal arc welding can be used on nearly all materials suitable for welding, simply and efficiently. Shielding gas is not supplied but is created – depending on the requirement and material – when the electrode sheath melts. The procedure is also used in small and medium-sized businesses and when building ships, pipelines as well as steel constructions and bridges outdoors.
  - Manual
    Join securely – work effectively
    Manual welding, or welding by hand, is among the most demanding and stressful activities in metal construction. To join materials securely welders frequently have to work for longer periods in so-called constrained positions. To make this possible over a longer period a welding torch is needed that relieves the welder and provides optimal support during work.
  - Automated
    Welding evenly – working economically
    With recurring welding jobs automated welding ensures fast processes, constant high welding quality and, if planned correctly, short amortisation periods. Thanks to technological progress in recent years, automated welding offers clear advantages in comparison with manual welding to SMEs as well. Automated welding can also be realised with different methods.
  - Thin sheet welding
    Ensuring stability – avoiding thermal distortion
    Welding thin plates up to 3 mm thick is one of the most complex joining tasks. The aim is to create a stable connection despite the thin material gauge. To prevent distortion of the metal plate and time-consuming reworking, as little heat as possible needs to be generated on the work surface. This requires lots of experience, finesse and welding equipment that is capable of working precisely in every situation.
  - Thick plate welding
    More efficient welding – improving quality
    Joining thick steel plates like those used to build ships and machines is one of the most complex and difficult welding tasks, and often large tolerance differences and gaps need to be compensated. All parts require careful preparation to ensure permanently stable connections. Also, the required result is often only achieved after several welding processes.
  - Welding large parts
    Wide welds – long distances
    Using optimised welding equipment is essential when welding large parts because the wide welds on the parts, which are usually subject to heavy loads, must remain permanently stable and securely attached. Also, large distances often need to be bridged between the power source and the welding point. The wire and gas supplies need to work reliably and all parameters and various welding programs must be retrievable, if possible by remote control.
  - Health
    Reducing strain – preventing tension
    Welding can impact on health, which is why there is a series of statutory prevention regulations governing released gases and vapours, extreme light and high temperatures. These include the use of extractor systems, mobile extractor devices, fume extraction torches and personal protective equipment. As a leading welding equipment partner, ABICOR BINZEL wants to help welders to reduce the physical stress associated with welding.
  - Research and development
    Using the test laboratory – driving innovations
    ABICOR BINZEL is one of the quality and innovation leaders for welding torches and has made a decisive contribution to shaping the world of welding over many years. ABICOR BINZEL is particularly concerned with continuously improving products, relieving the strain on welders, researching into new processes and supporting automated welding with the objective of developing efficiency-enhancing joining technology solutions. For this reason, developers in the ARClab test laboratory work daily on optimising product solutions and testing new products thoroughly.
  - Process development
    Utilise competence – optimise processes
    ABICOR BINZEL has been a leading specialist for welding technology for over 60 years and works with very different companies, institutes and research institutes. In the Innovation and Technology Centre (ITC) experts from ABICOR BINZEL are available with their whole experience to manufacturing companies across the whole spectrum of industry. They advise and support these companies in developing and optimising their joining technology processes and help them to make their production more economic, more efficient and better.
Referenser
- - MIG/MAG Svetspistol
    MIG/MAG Svetspistol MB EVO PRO
    MIG/MAG Svetspistol MB EVO
    MIG/MAG Svetspistol MB GRIP
    MIG/MAG Svetspistol MB ERGO
    MIG/MAG Svetspistol Push-Pull Plus
    MIG/MAG RAB GRIP Rökutsugspistol
    MIG/MAG RAB GRIP HE Rökutsugspistol
    MIG/MAG Svetspistol ABIMIG^® A T LW
    MIG/MAG Svetspistol ABIMIG^® A LW
    MIG/MAG Svetspistol ABIMIG^® W T
    MIG/MAG Svetspistol ABIMIG^® W
    MIG/MAG Svetspistol ABIMIG^® GRIP W
    Gaslös- rörtrådssvetspistol ALPHA FLUX 350
    Centraladapter-system
    Konfigurator
  - TIG Svetspistol
    TIG Svetspistol SR
    TIG Svetspistol ABITIG^® GRIP 9 - 26
    TIG Svetspistol ABITIG^® GRIP 150 - 500
    TIG Svetspistol ABITIG^® GRIP Little 9 - 24
    TIG Svetspistol ABITIG^® GRIP Little 90 - 260
  - Plasma Skär Svetspistol
    ABIPLAS^® CUT
    ABICUT
    PSB
  - Plasma Svetspistol
    ABIPLAS^® WELD
  - Robot Svetspistol
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP A
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP W
    MIG/MAG Svetspistolsystemet ABIROB^® W
    MIG/MAG Svetspistolsystemet ABIROB^® A
    MIG/MAG Svetsbrännarsystem ABIROB^® 350 GC
    MIG/MAG Svetspistolsystem ROBO Standard
    MIG/MAG Svetspistolsystem ROBO Compact W600
    MIG/MAG Svetspistolsystem TANDEM
    TIG Svetsbrännarsystem ABITIG^® WH
    TIG Svetsbrännarsystem ABITIG^® MT
    PLASMA Svetsbrännarsystem ABIPLAS^® WELD
    Maskinpistol ABIMIG^® SpinArc^®
  - Robot kringutrustning
    ATS-Rotor
    Robot Brytfäste CAT3
    Robot Brytfäste iCAT
    Robot Brytfäste iCAT mini
    Robot Brytfäste iSTM
    Trådmatningssystem MasterLiner
    Brännarrengöringsstation BRS
    Brännarväxelstation TES
    Trådklippstation DAV
    Injektionsenhet TSi
    Testjig
  - Robotströmkälla
    Robotströmkälla iROB
  - Trådmatningssystem
    Master-Feeder-System MFS-V3
  - Sensorer
    Gashanteringssystem EWR 2 / EWR 2 Net
    Fogspårningssensor TH6D
    Fogspårningssensor TH6i
  - Laser
    Tillämpningar
    Optik för laserlödning ALO1
    Optik för laserlödning och -svetsning ALO3
    Optik för remote laserhärdning RLH-A
    Optik för remote-lasersvetsning RLW-A
    Optik med stabilt fokusläge BO-SF
    Optik BO
  - Uttag och kontakter
    Welding cable connector system ABIPLUG
  - Elektrodhållare, kolbågsbrännare och kolbågselektroder
    Electrode holders DE 2200 / 2300 / 2400 / 2500
    Gouging Torch K10 / K12 / K12 T / K 16 / K16 T
    Gouging Torch TEAM BINZEL^® G 3000 / G 4000
    Mejslingselektroder ABIARC
  - Verktyg
    Accessories for professionals
    Professional accessories increase the performance and reliability of your torch. Ideally matched they form the basis for functional safety and a long service life.
  - Rökutsugssystem och kylaggregat
    Rökutsugssystem FES-200 & FES-200 W3
    Rökutsugssystem FEC
    Kylaggregat CR 1000 / CR 1250
    Kylaggregat ABIDRIVE V2
  - Svetskemikalier
    Anti-spatter sprays
    Anti-spatter pastes
    Anti-spatter liquids
    Coolant liquids
  - Volframelektroder
    For best welding results
    For tungsten inert gas welding (TIG), the non-fusing and temperature resistant tungsten electrode, in addition to the torch, the energy source and the inert gas, is a major factor for obtaining optimum results.
  - Fitness för svetsare
    Fitnessmanual för svetsaren
    Fitness Exercises for Welders
  - Stainless steel
    Join securely – prevent corrosion
    Welding stainless steel is a special challenge. To create clean seams and permanently stable connections with minimal risk of corrosion it is important first of all to determine the stainless steel exactly. After this, the welding method and the welding process must be exactly aligned to this. Welding is usually carried out with TIG, MIG, MAG and manual metal arc welding methods.
  - Aluminium
    Long-lasting connections – outstanding visual appearance
    Aluminium is a lightweight and at the same time solid material that is used wherever stable components must not weigh very much. The material is used in alloys in aerospace, as well as in the construction of railway vehicle, motor vehicles and ships. TIG, plasma, MIG or even laser welding methods are used, depending on the specification and the thickness of the workpiece.
  - Structural steel
    Numerous types – infinite possibilities
    Structural steel is a generic term used for various steels that are processed in the steel and machine engineering industries. The steel is available as rods, profiles, pipes and sheet metal in a number of thicknesses and dimensions. Structural steel is usually easy to weld, durable when handled and suitable for all conventional welding procedures.
  - Special material
    Special properties – special applications
    Special materials have special properties and are suitable for special applications. There are highly durable, strong, light or resistant special materials for various requirements. These may be particularly resistant to chemical, thermal or mechanical loads. When selecting the right welding procedure for these materials it is important to know the precise material properties.
  - MIG (GMAW)
    Metal inert gas welding
    MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode and the material. The melting electrode supplies the additive material for forming the weld. MIG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - MAG (GMAW)
    Metal active gas welding
    MAG welding is a metal shielding gas welding process (GMAW) with active gas, in which the arc burns between a continuously fed melting wire electrode and the material. The melting wire electrode supplies the additive filler metal for forming the weld. MAG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - TIG (GTAW)
    Tungsten inert gas welding
    TIG welding is tungsten shielding gas welding process (GTAW) with inert gas, in which the arc burns between a non-melting tungsten electrode and the material. TIG welding can be used simply and economically on a variety of materials. Different shielding gases are used, depending on the requirement and the material.
  - Laser welding
    Laser beam welding
    Laser beam welding - in brief: laser welding - is a beam welding process that is used to join metals. The heat required to connect the parts is generated by the laser beam which is focussed onto the weld. Laser welding is a very fast and efficient welding process that is highly suited for automated processes.
  - Plasma welding (PAW)
    Tungsten plasma welding / Plasma metal inert gas welding
    Plasma welding is a shielding gas welding process with inert gas and a further development of the TIG welding procedure. Here, the arc burns between a non-melting electrode and the material. The plasma beam, which is used as a heat source, is created by a high supply of energy that makes the shielding gas electrically conductive. The arc is constricted and thereby reaches a higher energy density than during TIG welding. Plasma welding is suitable for all electrically conductive materials.
  - Plasma cutting
    Plasma arc cutting
    Plasma cutting is a arc cutting process in which the arc burns between a non-melting electrode and the material. The heat source is a beam of very hot electrically conductive gas, the so-called plasma beam. Plasma cutting is suitable for all electrically conductive materials. Various cutting gases are used in plasma cutting depending on the requirement and material.
  - Manual metal arc welding (MMAW)
    Arc electrode welding
    Manual metal arc welding is a metal arc welding process (MMAW) in which an electrical arc burns between a sheathed rod electrode and the material. No shielding gas is used in manual metal arc welding. The sheathed melting electrode forms a shielding gas to protect the smelt and supplies additives to create the required seam. Manual metal arc welding can be used on nearly all materials suitable for welding, simply and efficiently. Shielding gas is not supplied but is created – depending on the requirement and material – when the electrode sheath melts. The procedure is also used in small and medium-sized businesses and when building ships, pipelines as well as steel constructions and bridges outdoors.
  - Manual
    Join securely – work effectively
    Manual welding, or welding by hand, is among the most demanding and stressful activities in metal construction. To join materials securely welders frequently have to work for longer periods in so-called constrained positions. To make this possible over a longer period a welding torch is needed that relieves the welder and provides optimal support during work.
  - Automated
    Welding evenly – working economically
    With recurring welding jobs automated welding ensures fast processes, constant high welding quality and, if planned correctly, short amortisation periods. Thanks to technological progress in recent years, automated welding offers clear advantages in comparison with manual welding to SMEs as well. Automated welding can also be realised with different methods.
  - Thin sheet welding
    Ensuring stability – avoiding thermal distortion
    Welding thin plates up to 3 mm thick is one of the most complex joining tasks. The aim is to create a stable connection despite the thin material gauge. To prevent distortion of the metal plate and time-consuming reworking, as little heat as possible needs to be generated on the work surface. This requires lots of experience, finesse and welding equipment that is capable of working precisely in every situation.
  - Thick plate welding
    More efficient welding – improving quality
    Joining thick steel plates like those used to build ships and machines is one of the most complex and difficult welding tasks, and often large tolerance differences and gaps need to be compensated. All parts require careful preparation to ensure permanently stable connections. Also, the required result is often only achieved after several welding processes.
  - Welding large parts
    Wide welds – long distances
    Using optimised welding equipment is essential when welding large parts because the wide welds on the parts, which are usually subject to heavy loads, must remain permanently stable and securely attached. Also, large distances often need to be bridged between the power source and the welding point. The wire and gas supplies need to work reliably and all parameters and various welding programs must be retrievable, if possible by remote control.
  - Health
    Reducing strain – preventing tension
    Welding can impact on health, which is why there is a series of statutory prevention regulations governing released gases and vapours, extreme light and high temperatures. These include the use of extractor systems, mobile extractor devices, fume extraction torches and personal protective equipment. As a leading welding equipment partner, ABICOR BINZEL wants to help welders to reduce the physical stress associated with welding.
  - Research and development
    Using the test laboratory – driving innovations
    ABICOR BINZEL is one of the quality and innovation leaders for welding torches and has made a decisive contribution to shaping the world of welding over many years. ABICOR BINZEL is particularly concerned with continuously improving products, relieving the strain on welders, researching into new processes and supporting automated welding with the objective of developing efficiency-enhancing joining technology solutions. For this reason, developers in the ARClab test laboratory work daily on optimising product solutions and testing new products thoroughly.
  - Process development
    Utilise competence – optimise processes
    ABICOR BINZEL has been a leading specialist for welding technology for over 60 years and works with very different companies, institutes and research institutes. In the Innovation and Technology Centre (ITC) experts from ABICOR BINZEL are available with their whole experience to manufacturing companies across the whole spectrum of industry. They advise and support these companies in developing and optimising their joining technology processes and help them to make their production more economic, more efficient and better.
  - BOMAG GmbH, Boppard, Germany
    Testing the MB EVO PRO: lighter, more flexible and cooler
    BOMAG specialises in machines for compacting earth, asphalt and waste. The global market leader based in Boppard at the Rhein river has around 2500 employees worldwide. ABICOR BINZEL welding torches have been used here for over 30 years for demanding welding tasks in steel construction work. In test operations over several weeks, the new air- and liquid-cooled MB EVO PRO welding torches convinced welders and those responsible straight away.
  - CRIST Offshore Sp. zo.o., Gdynia, Poland
    The specialist for offshore constructions and platforms
    The CRIST shipyard in Gdynia has the longest dry-dock in Poland and specialises in building giant constructions and ships for the offshore sector. About 150 people work in the shipyard's offshore sector. The company has relied on ABICOR BINZEL's flexible welding torches for many years.
  - E & F Metall- und Rohrleitungsbau GmbH, Föhren, Germany
    Stainless and steel – for the highest demands
    E & F is an experienced specialist for metal constructions and pipelines in the foodstuffs and pharmaceutical industries, as well as in other sectors with high quality demands. Over 80 welders work for the company worldwide. Following an intensive test phase, E & F has converted its welding torches to product solutions from ABICOR BINZEL.
  - Kranbau Köthen GmbH, Köthen, Germany
    We take a load off you
    Kranbau Köthen GmbH develops and manufactures individual special, process and automatic cranes. The company was founded in 1934, has around 250 employees and supplies customers all over the world. As a long-term industrial user, Kranbau Köthen also supports ABICOR BINZEL in developing and testing new products and technologies.
  - Remontowa Shipbuilding SA, Danzig, Poland
    Ship conversion and shipbuilding with the highest standards
    The Remontowa shipyard in Gdansk is one of the leading shipyards for ship conversions in Europe. The company was founded in 1952 and carries out over 200 ship repairs and conversions annually. Following a convincing test, the shipyard now uses ABIMIG® A T LW torches from ABICOR BINZEL for all its welding work.
  - SAMSON AG, Frankfurt, Germany
    Valves for measurement and control technology
    SAMSON AG is one of the world's leading appliance manufacturers for measurement and control technology. The company stands for quality technical workmanship, entrepreneurial continuity and great innovative capabilities. In order to realise different manual and automated welding work securely in the desired quality, Samson AG relies on welding torches from ABICOR BINZEL.
  - Gdansk Shipyard SA, Danzig, Poland
    Shipbuilders with a long tradition
    The tradition-steeped Gdansk Shipyard counts flexibility and versatility among its strengths. It demands both from its workforce and their tools. The shipyard relies on welding torches from ABICOR BINZEL to enable its welders to carry out their work optimally.
  - Bronpi Calefacción, Lucena, Spain
    100% tightness for comfortable warmth
    Bronpi Calefacción, based in Lucena, southern Spain, develops and manufactures high-quality fire places, wood burning stoves and pellet heating systems. The company was founded in 1985 and has over 200 employees. Along with Spain, the main sales markets are above all England and other European countries. Bronpi relies completely on ABICOR BINZEL products for welding technology.
  - Gosan S.A., Bilbao, Spain
    Gosan products lift the world
    Since 1971 Gosan has supplied mechanical components for lifting, conveying and storage systems all over the world. The market leader focusses on customised welded sheaves for lifting heavy loads. To ensure that all quality and safety requirements are fulfilled, Gosan uses technology from ABICOR BINZEL for automated and hand welding work.
  - Stahl Maschinenbau GmbH & Co. KG, Perkam, Germany
    Reliable series production of hydraulic tanks
    Stahl Maschinenbau in Perkam, Bavaria, specialises in the development and production of hydraulic and diesel tanks for construction machines, cranes and industrial lifts. The company meets the high standards for quality and series production among other things through the use of robot welding technology from ABICOR BINZEL.
  - WP Performance Systems, Munderfing, Austria
    World-class welding
    WP Performance Systems has already won over 300 world championships. Because in motorcycle racing there's hardly a single professional who does not use frames from the Austrian manufacturer. High-end chassis from WP are regularly found among the leaders both off-road and in road races. One reason: their high quality, which is enabled as well with the help of ABICOR BINZEL welding technology.
Industrier
- - Industrier
    Fordonsbyggnad och transportsektor
    Allmän tillverkning
    Skeppsbyggnad och offshore
    Byggnation
    Tung maskinindustri
    Energi
    Nya teknologier
  - MIG/MAG Svetspistol
    MIG/MAG Svetspistol MB EVO PRO
    MIG/MAG Svetspistol MB EVO
    MIG/MAG Svetspistol MB GRIP
    MIG/MAG Svetspistol MB ERGO
    MIG/MAG Svetspistol Push-Pull Plus
    MIG/MAG RAB GRIP Rökutsugspistol
    MIG/MAG RAB GRIP HE Rökutsugspistol
    MIG/MAG Svetspistol ABIMIG^® A T LW
    MIG/MAG Svetspistol ABIMIG^® A LW
    MIG/MAG Svetspistol ABIMIG^® W T
    MIG/MAG Svetspistol ABIMIG^® W
    MIG/MAG Svetspistol ABIMIG^® GRIP W
    Gaslös- rörtrådssvetspistol ALPHA FLUX 350
    Centraladapter-system
    Konfigurator
  - TIG Svetspistol
    TIG Svetspistol SR
    TIG Svetspistol ABITIG^® GRIP 9 - 26
    TIG Svetspistol ABITIG^® GRIP 150 - 500
    TIG Svetspistol ABITIG^® GRIP Little 9 - 24
    TIG Svetspistol ABITIG^® GRIP Little 90 - 260
  - Plasma Skär Svetspistol
    ABIPLAS^® CUT
    ABICUT
    PSB
  - Plasma Svetspistol
    ABIPLAS^® WELD
  - Robot Svetspistol
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP A
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP W
    MIG/MAG Svetspistolsystemet ABIROB^® W
    MIG/MAG Svetspistolsystemet ABIROB^® A
    MIG/MAG Svetsbrännarsystem ABIROB^® 350 GC
    MIG/MAG Svetspistolsystem ROBO Standard
    MIG/MAG Svetspistolsystem ROBO Compact W600
    MIG/MAG Svetspistolsystem TANDEM
    TIG Svetsbrännarsystem ABITIG^® WH
    TIG Svetsbrännarsystem ABITIG^® MT
    PLASMA Svetsbrännarsystem ABIPLAS^® WELD
    Maskinpistol ABIMIG^® SpinArc^®
  - Robot kringutrustning
    ATS-Rotor
    Robot Brytfäste CAT3
    Robot Brytfäste iCAT
    Robot Brytfäste iCAT mini
    Robot Brytfäste iSTM
    Trådmatningssystem MasterLiner
    Brännarrengöringsstation BRS
    Brännarväxelstation TES
    Trådklippstation DAV
    Injektionsenhet TSi
    Testjig
  - Robotströmkälla
    Robotströmkälla iROB
  - Trådmatningssystem
    Master-Feeder-System MFS-V3
  - Sensorer
    Gashanteringssystem EWR 2 / EWR 2 Net
    Fogspårningssensor TH6D
    Fogspårningssensor TH6i
  - Laser
    Tillämpningar
    Optik för laserlödning ALO1
    Optik för laserlödning och -svetsning ALO3
    Optik för remote laserhärdning RLH-A
    Optik för remote-lasersvetsning RLW-A
    Optik med stabilt fokusläge BO-SF
    Optik BO
  - Uttag och kontakter
    Welding cable connector system ABIPLUG
  - Elektrodhållare, kolbågsbrännare och kolbågselektroder
    Electrode holders DE 2200 / 2300 / 2400 / 2500
    Gouging Torch K10 / K12 / K12 T / K 16 / K16 T
    Gouging Torch TEAM BINZEL^® G 3000 / G 4000
    Mejslingselektroder ABIARC
  - Verktyg
    Accessories for professionals
    Professional accessories increase the performance and reliability of your torch. Ideally matched they form the basis for functional safety and a long service life.
  - Rökutsugssystem och kylaggregat
    Rökutsugssystem FES-200 & FES-200 W3
    Rökutsugssystem FEC
    Kylaggregat CR 1000 / CR 1250
    Kylaggregat ABIDRIVE V2
  - Svetskemikalier
    Anti-spatter sprays
    Anti-spatter pastes
    Anti-spatter liquids
    Coolant liquids
  - Volframelektroder
    For best welding results
    For tungsten inert gas welding (TIG), the non-fusing and temperature resistant tungsten electrode, in addition to the torch, the energy source and the inert gas, is a major factor for obtaining optimum results.
  - Fitness för svetsare
    Fitnessmanual för svetsaren
    Fitness Exercises for Welders
  - Stainless steel
    Join securely – prevent corrosion
    Welding stainless steel is a special challenge. To create clean seams and permanently stable connections with minimal risk of corrosion it is important first of all to determine the stainless steel exactly. After this, the welding method and the welding process must be exactly aligned to this. Welding is usually carried out with TIG, MIG, MAG and manual metal arc welding methods.
  - Aluminium
    Long-lasting connections – outstanding visual appearance
    Aluminium is a lightweight and at the same time solid material that is used wherever stable components must not weigh very much. The material is used in alloys in aerospace, as well as in the construction of railway vehicle, motor vehicles and ships. TIG, plasma, MIG or even laser welding methods are used, depending on the specification and the thickness of the workpiece.
  - Structural steel
    Numerous types – infinite possibilities
    Structural steel is a generic term used for various steels that are processed in the steel and machine engineering industries. The steel is available as rods, profiles, pipes and sheet metal in a number of thicknesses and dimensions. Structural steel is usually easy to weld, durable when handled and suitable for all conventional welding procedures.
  - Special material
    Special properties – special applications
    Special materials have special properties and are suitable for special applications. There are highly durable, strong, light or resistant special materials for various requirements. These may be particularly resistant to chemical, thermal or mechanical loads. When selecting the right welding procedure for these materials it is important to know the precise material properties.
  - MIG (GMAW)
    Metal inert gas welding
    MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode and the material. The melting electrode supplies the additive material for forming the weld. MIG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - MAG (GMAW)
    Metal active gas welding
    MAG welding is a metal shielding gas welding process (GMAW) with active gas, in which the arc burns between a continuously fed melting wire electrode and the material. The melting wire electrode supplies the additive filler metal for forming the weld. MAG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - TIG (GTAW)
    Tungsten inert gas welding
    TIG welding is tungsten shielding gas welding process (GTAW) with inert gas, in which the arc burns between a non-melting tungsten electrode and the material. TIG welding can be used simply and economically on a variety of materials. Different shielding gases are used, depending on the requirement and the material.
  - Laser welding
    Laser beam welding
    Laser beam welding - in brief: laser welding - is a beam welding process that is used to join metals. The heat required to connect the parts is generated by the laser beam which is focussed onto the weld. Laser welding is a very fast and efficient welding process that is highly suited for automated processes.
  - Plasma welding (PAW)
    Tungsten plasma welding / Plasma metal inert gas welding
    Plasma welding is a shielding gas welding process with inert gas and a further development of the TIG welding procedure. Here, the arc burns between a non-melting electrode and the material. The plasma beam, which is used as a heat source, is created by a high supply of energy that makes the shielding gas electrically conductive. The arc is constricted and thereby reaches a higher energy density than during TIG welding. Plasma welding is suitable for all electrically conductive materials.
  - Plasma cutting
    Plasma arc cutting
    Plasma cutting is a arc cutting process in which the arc burns between a non-melting electrode and the material. The heat source is a beam of very hot electrically conductive gas, the so-called plasma beam. Plasma cutting is suitable for all electrically conductive materials. Various cutting gases are used in plasma cutting depending on the requirement and material.
  - Manual metal arc welding (MMAW)
    Arc electrode welding
    Manual metal arc welding is a metal arc welding process (MMAW) in which an electrical arc burns between a sheathed rod electrode and the material. No shielding gas is used in manual metal arc welding. The sheathed melting electrode forms a shielding gas to protect the smelt and supplies additives to create the required seam. Manual metal arc welding can be used on nearly all materials suitable for welding, simply and efficiently. Shielding gas is not supplied but is created – depending on the requirement and material – when the electrode sheath melts. The procedure is also used in small and medium-sized businesses and when building ships, pipelines as well as steel constructions and bridges outdoors.
  - Manual
    Join securely – work effectively
    Manual welding, or welding by hand, is among the most demanding and stressful activities in metal construction. To join materials securely welders frequently have to work for longer periods in so-called constrained positions. To make this possible over a longer period a welding torch is needed that relieves the welder and provides optimal support during work.
  - Automated
    Welding evenly – working economically
    With recurring welding jobs automated welding ensures fast processes, constant high welding quality and, if planned correctly, short amortisation periods. Thanks to technological progress in recent years, automated welding offers clear advantages in comparison with manual welding to SMEs as well. Automated welding can also be realised with different methods.
  - Thin sheet welding
    Ensuring stability – avoiding thermal distortion
    Welding thin plates up to 3 mm thick is one of the most complex joining tasks. The aim is to create a stable connection despite the thin material gauge. To prevent distortion of the metal plate and time-consuming reworking, as little heat as possible needs to be generated on the work surface. This requires lots of experience, finesse and welding equipment that is capable of working precisely in every situation.
  - Thick plate welding
    More efficient welding – improving quality
    Joining thick steel plates like those used to build ships and machines is one of the most complex and difficult welding tasks, and often large tolerance differences and gaps need to be compensated. All parts require careful preparation to ensure permanently stable connections. Also, the required result is often only achieved after several welding processes.
  - Welding large parts
    Wide welds – long distances
    Using optimised welding equipment is essential when welding large parts because the wide welds on the parts, which are usually subject to heavy loads, must remain permanently stable and securely attached. Also, large distances often need to be bridged between the power source and the welding point. The wire and gas supplies need to work reliably and all parameters and various welding programs must be retrievable, if possible by remote control.
  - Health
    Reducing strain – preventing tension
    Welding can impact on health, which is why there is a series of statutory prevention regulations governing released gases and vapours, extreme light and high temperatures. These include the use of extractor systems, mobile extractor devices, fume extraction torches and personal protective equipment. As a leading welding equipment partner, ABICOR BINZEL wants to help welders to reduce the physical stress associated with welding.
  - Research and development
    Using the test laboratory – driving innovations
    ABICOR BINZEL is one of the quality and innovation leaders for welding torches and has made a decisive contribution to shaping the world of welding over many years. ABICOR BINZEL is particularly concerned with continuously improving products, relieving the strain on welders, researching into new processes and supporting automated welding with the objective of developing efficiency-enhancing joining technology solutions. For this reason, developers in the ARClab test laboratory work daily on optimising product solutions and testing new products thoroughly.
  - Process development
    Utilise competence – optimise processes
    ABICOR BINZEL has been a leading specialist for welding technology for over 60 years and works with very different companies, institutes and research institutes. In the Innovation and Technology Centre (ITC) experts from ABICOR BINZEL are available with their whole experience to manufacturing companies across the whole spectrum of industry. They advise and support these companies in developing and optimising their joining technology processes and help them to make their production more economic, more efficient and better.
  - BOMAG GmbH, Boppard, Germany
    Testing the MB EVO PRO: lighter, more flexible and cooler
    BOMAG specialises in machines for compacting earth, asphalt and waste. The global market leader based in Boppard at the Rhein river has around 2500 employees worldwide. ABICOR BINZEL welding torches have been used here for over 30 years for demanding welding tasks in steel construction work. In test operations over several weeks, the new air- and liquid-cooled MB EVO PRO welding torches convinced welders and those responsible straight away.
  - CRIST Offshore Sp. zo.o., Gdynia, Poland
    The specialist for offshore constructions and platforms
    The CRIST shipyard in Gdynia has the longest dry-dock in Poland and specialises in building giant constructions and ships for the offshore sector. About 150 people work in the shipyard's offshore sector. The company has relied on ABICOR BINZEL's flexible welding torches for many years.
  - E & F Metall- und Rohrleitungsbau GmbH, Föhren, Germany
    Stainless and steel – for the highest demands
    E & F is an experienced specialist for metal constructions and pipelines in the foodstuffs and pharmaceutical industries, as well as in other sectors with high quality demands. Over 80 welders work for the company worldwide. Following an intensive test phase, E & F has converted its welding torches to product solutions from ABICOR BINZEL.
  - Kranbau Köthen GmbH, Köthen, Germany
    We take a load off you
    Kranbau Köthen GmbH develops and manufactures individual special, process and automatic cranes. The company was founded in 1934, has around 250 employees and supplies customers all over the world. As a long-term industrial user, Kranbau Köthen also supports ABICOR BINZEL in developing and testing new products and technologies.
  - Remontowa Shipbuilding SA, Danzig, Poland
    Ship conversion and shipbuilding with the highest standards
    The Remontowa shipyard in Gdansk is one of the leading shipyards for ship conversions in Europe. The company was founded in 1952 and carries out over 200 ship repairs and conversions annually. Following a convincing test, the shipyard now uses ABIMIG® A T LW torches from ABICOR BINZEL for all its welding work.
  - SAMSON AG, Frankfurt, Germany
    Valves for measurement and control technology
    SAMSON AG is one of the world's leading appliance manufacturers for measurement and control technology. The company stands for quality technical workmanship, entrepreneurial continuity and great innovative capabilities. In order to realise different manual and automated welding work securely in the desired quality, Samson AG relies on welding torches from ABICOR BINZEL.
  - Gdansk Shipyard SA, Danzig, Poland
    Shipbuilders with a long tradition
    The tradition-steeped Gdansk Shipyard counts flexibility and versatility among its strengths. It demands both from its workforce and their tools. The shipyard relies on welding torches from ABICOR BINZEL to enable its welders to carry out their work optimally.
  - Bronpi Calefacción, Lucena, Spain
    100% tightness for comfortable warmth
    Bronpi Calefacción, based in Lucena, southern Spain, develops and manufactures high-quality fire places, wood burning stoves and pellet heating systems. The company was founded in 1985 and has over 200 employees. Along with Spain, the main sales markets are above all England and other European countries. Bronpi relies completely on ABICOR BINZEL products for welding technology.
  - Gosan S.A., Bilbao, Spain
    Gosan products lift the world
    Since 1971 Gosan has supplied mechanical components for lifting, conveying and storage systems all over the world. The market leader focusses on customised welded sheaves for lifting heavy loads. To ensure that all quality and safety requirements are fulfilled, Gosan uses technology from ABICOR BINZEL for automated and hand welding work.
  - Stahl Maschinenbau GmbH & Co. KG, Perkam, Germany
    Reliable series production of hydraulic tanks
    Stahl Maschinenbau in Perkam, Bavaria, specialises in the development and production of hydraulic and diesel tanks for construction machines, cranes and industrial lifts. The company meets the high standards for quality and series production among other things through the use of robot welding technology from ABICOR BINZEL.
  - WP Performance Systems, Munderfing, Austria
    World-class welding
    WP Performance Systems has already won over 300 world championships. Because in motorcycle racing there's hardly a single professional who does not use frames from the Austrian manufacturer. High-end chassis from WP are regularly found among the leaders both off-road and in road races. One reason: their high quality, which is enabled as well with the help of ABICOR BINZEL welding technology.
  - Fordonsbyggnad och transportsektor
    Perfekt utseende – högsta säkerhet och stabilitet
    I fordonsbyggnadsbranschen och transportsektorn måste svetsfogarna uppfylla extremt höga krav. Beroende på användningsområde ligger fokus på utmattningstid, säkerhet och utseende. Tjocka plåtar används till chassin, tunnplåt och aluminium till lätta karossdelar, och skevningsfritt stål till kupén. ABICOR BINZEL erbjuder fordonsbyggare och deras underleverantörer ett komplett program med svetstekniklösningar för manuella, delmekaniserade och automatiserade svetsprocesser.
  - Allmän tillverkning
    Mångsidiga material – anpassade svetsmetoder
    Från rörledningar till kontorsstolar, från uttagsautomater till berg- och dalbanor. Nästan allt kräver svetsteknik. Lika brett som användningsspektrat är, lika varierande är kraven på svetsare, processer och utrustning. Avgörande för valet av svetsmetod är materialet och dess särskilda egenskaper. ABICOR BINZEL levererar optimala fogtekniklösningar för snart sagt alla material och arbetsuppgifter - manuellt, mekaniserat eller automatiserat.
  - Skeppsbyggnad och offshore
    Robusta krav – många olika svetsuppgifter
    Inom skeppsbyggnad och offshore ställs det mycket höga krav på svetsare och utrustning. Påverkan från väder och vind måste tas med i beräkningen, så även de särskilda egenskaperna hos primade plåtar, skevningsfrihet i stora segment och svetsfogar som kan lackeras utan efterarbete. Svetsarna arbetar ofta i snäva utrymmen och forcerade lägen med många byten av arbetsställning, och de måste klara stora sträckor. ABICOR BINZEL erbjuder anpassade lösningar för handsvetsning och delmekaniserad svetsning samt robotsvetsning.
  - Byggnation
    Stabila förbindningar – delmekaniserade lösningar
    I byggbranschen innebär svetsning i regel sammanfogning av enkelt eller förzinkat byggstål och aluminium. Svetsning sker t.ex. i produktionshallar, på byggarbetsplatser, i hisschakt eller på bryggor. Svetsmetoden väljs utifrån material och tillämpning. Vid manuellt svetsarbete är det viktigt med en lätt och ergonomiskt optimal pistolteknik. Delmekaniserad och automatiserat svetsning, t.ex. inom förproduktion, ställer särskilda krav på svetstekniken.
  - Tung maskinindustri
    Krävande svetsuppgifter – särskild utrustning
    Inom den tunga maskinindustrin krävs kraftfull och flexibel svetsutrustning som stödjer svetsarna i arbetet på ett optimalt sätt. Många gånger måste tjockväggiga, delvis svåråtkomliga komponenter svetsas för hand i forcerade lägen. Svetsfogarna måste klara mycket höga belastningar och uppfylla de robusta kraven. ABICOR BINZEL har ett stort sortiment av effektiva standard- och specialbrännare för delmekaniserad svetsning, samt speciallösningar för automatiserad svetsning, t.ex. vid serietillverkning av moduler.
  - Energi
    Extrema belastningar – särskilda svetslösningar
    Rörledningar och tankar, vindhjul och turbiner, solfångare och sopförbränningsanläggningar: energihantering och apparatkonstruktion har många olika facetter. De allra flesta av dem kräver robusta och säkra svetsfogar. Förutom stål svetsas ofta specialmaterial som klarar mycket höga krav på stabilitet och säkerhet. ABICOR BINZEL har ett stort sortiment av effektiv och ergonomisk svetsutrustning för manuella, delmekaniserade och automatiserade svetsprocesser.
  - Nya teknologier
    Megatrender blir verklighet – med innovativa fogningstekniker
    Sammanfogningstekniken påverkas av ett antal teknologiska utvecklingar. Generativa eller additiva tillverkningsmetoder med metalliska komponenter kräver att särskild svetsutrustning används. Vid produktion av magasin för ackumulatorer för elfordon krävs särskilda lser- och specialfogningsmetoder i mikro- och makroområdet. ABICOR BINZEL har passande lösningar för delmekaniserad och automatiserad produktion med innovativa fogningstekniker, konventionella stål och varierande specialmaterial.
Service
- - Download Center
    Kataloger
    Bruksanvisningar
    Informationsblad
    Säkerhetsdatablad
    Försäkran om överensstämmelse
  - Media
    Tidskrift WELDER`S WORLD
    Video Galleri
  - MIG/MAG Svetspistol
    MIG/MAG Svetspistol MB EVO PRO
    MIG/MAG Svetspistol MB EVO
    MIG/MAG Svetspistol MB GRIP
    MIG/MAG Svetspistol MB ERGO
    MIG/MAG Svetspistol Push-Pull Plus
    MIG/MAG RAB GRIP Rökutsugspistol
    MIG/MAG RAB GRIP HE Rökutsugspistol
    MIG/MAG Svetspistol ABIMIG^® A T LW
    MIG/MAG Svetspistol ABIMIG^® A LW
    MIG/MAG Svetspistol ABIMIG^® W T
    MIG/MAG Svetspistol ABIMIG^® W
    MIG/MAG Svetspistol ABIMIG^® GRIP W
    Gaslös- rörtrådssvetspistol ALPHA FLUX 350
    Centraladapter-system
    Konfigurator
  - TIG Svetspistol
    TIG Svetspistol SR
    TIG Svetspistol ABITIG^® GRIP 9 - 26
    TIG Svetspistol ABITIG^® GRIP 150 - 500
    TIG Svetspistol ABITIG^® GRIP Little 9 - 24
    TIG Svetspistol ABITIG^® GRIP Little 90 - 260
  - Plasma Skär Svetspistol
    ABIPLAS^® CUT
    ABICUT
    PSB
  - Plasma Svetspistol
    ABIPLAS^® WELD
  - Robot Svetspistol
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP A
    MIG / MAG svetsbrännarsystem ROBO WH och ROBO WH-PP W
    MIG/MAG Svetspistolsystemet ABIROB^® W
    MIG/MAG Svetspistolsystemet ABIROB^® A
    MIG/MAG Svetsbrännarsystem ABIROB^® 350 GC
    MIG/MAG Svetspistolsystem ROBO Standard
    MIG/MAG Svetspistolsystem ROBO Compact W600
    MIG/MAG Svetspistolsystem TANDEM
    TIG Svetsbrännarsystem ABITIG^® WH
    TIG Svetsbrännarsystem ABITIG^® MT
    PLASMA Svetsbrännarsystem ABIPLAS^® WELD
    Maskinpistol ABIMIG^® SpinArc^®
  - Robot kringutrustning
    ATS-Rotor
    Robot Brytfäste CAT3
    Robot Brytfäste iCAT
    Robot Brytfäste iCAT mini
    Robot Brytfäste iSTM
    Trådmatningssystem MasterLiner
    Brännarrengöringsstation BRS
    Brännarväxelstation TES
    Trådklippstation DAV
    Injektionsenhet TSi
    Testjig
  - Robotströmkälla
    Robotströmkälla iROB
  - Trådmatningssystem
    Master-Feeder-System MFS-V3
  - Sensorer
    Gashanteringssystem EWR 2 / EWR 2 Net
    Fogspårningssensor TH6D
    Fogspårningssensor TH6i
  - Laser
    Tillämpningar
    Optik för laserlödning ALO1
    Optik för laserlödning och -svetsning ALO3
    Optik för remote laserhärdning RLH-A
    Optik för remote-lasersvetsning RLW-A
    Optik med stabilt fokusläge BO-SF
    Optik BO
  - Uttag och kontakter
    Welding cable connector system ABIPLUG
  - Elektrodhållare, kolbågsbrännare och kolbågselektroder
    Electrode holders DE 2200 / 2300 / 2400 / 2500
    Gouging Torch K10 / K12 / K12 T / K 16 / K16 T
    Gouging Torch TEAM BINZEL^® G 3000 / G 4000
    Mejslingselektroder ABIARC
  - Verktyg
    Accessories for professionals
    Professional accessories increase the performance and reliability of your torch. Ideally matched they form the basis for functional safety and a long service life.
  - Rökutsugssystem och kylaggregat
    Rökutsugssystem FES-200 & FES-200 W3
    Rökutsugssystem FEC
    Kylaggregat CR 1000 / CR 1250
    Kylaggregat ABIDRIVE V2
  - Svetskemikalier
    Anti-spatter sprays
    Anti-spatter pastes
    Anti-spatter liquids
    Coolant liquids
  - Volframelektroder
    For best welding results
    For tungsten inert gas welding (TIG), the non-fusing and temperature resistant tungsten electrode, in addition to the torch, the energy source and the inert gas, is a major factor for obtaining optimum results.
  - Fitness för svetsare
    Fitnessmanual för svetsaren
    Fitness Exercises for Welders
  - Stainless steel
    Join securely – prevent corrosion
    Welding stainless steel is a special challenge. To create clean seams and permanently stable connections with minimal risk of corrosion it is important first of all to determine the stainless steel exactly. After this, the welding method and the welding process must be exactly aligned to this. Welding is usually carried out with TIG, MIG, MAG and manual metal arc welding methods.
  - Aluminium
    Long-lasting connections – outstanding visual appearance
    Aluminium is a lightweight and at the same time solid material that is used wherever stable components must not weigh very much. The material is used in alloys in aerospace, as well as in the construction of railway vehicle, motor vehicles and ships. TIG, plasma, MIG or even laser welding methods are used, depending on the specification and the thickness of the workpiece.
  - Structural steel
    Numerous types – infinite possibilities
    Structural steel is a generic term used for various steels that are processed in the steel and machine engineering industries. The steel is available as rods, profiles, pipes and sheet metal in a number of thicknesses and dimensions. Structural steel is usually easy to weld, durable when handled and suitable for all conventional welding procedures.
  - Special material
    Special properties – special applications
    Special materials have special properties and are suitable for special applications. There are highly durable, strong, light or resistant special materials for various requirements. These may be particularly resistant to chemical, thermal or mechanical loads. When selecting the right welding procedure for these materials it is important to know the precise material properties.
  - MIG (GMAW)
    Metal inert gas welding
    MIG welding is a metal shielding gas welding process (GMAW) with inert gas, in which the light arc burns between a continuously fed melting wire electrode and the material. The melting electrode supplies the additive material for forming the weld. MIG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - MAG (GMAW)
    Metal active gas welding
    MAG welding is a metal shielding gas welding process (GMAW) with active gas, in which the arc burns between a continuously fed melting wire electrode and the material. The melting wire electrode supplies the additive filler metal for forming the weld. MAG welding can be used simply and economically with nearly all materials that are suitable for welding. Different shielding gases are used, depending on the requirement and the material.
  - TIG (GTAW)
    Tungsten inert gas welding
    TIG welding is tungsten shielding gas welding process (GTAW) with inert gas, in which the arc burns between a non-melting tungsten electrode and the material. TIG welding can be used simply and economically on a variety of materials. Different shielding gases are used, depending on the requirement and the material.
  - Laser welding
    Laser beam welding
    Laser beam welding - in brief: laser welding - is a beam welding process that is used to join metals. The heat required to connect the parts is generated by the laser beam which is focussed onto the weld. Laser welding is a very fast and efficient welding process that is highly suited for automated processes.
  - Plasma welding (PAW)
    Tungsten plasma welding / Plasma metal inert gas welding
    Plasma welding is a shielding gas welding process with inert gas and a further development of the TIG welding procedure. Here, the arc burns between a non-melting electrode and the material. The plasma beam, which is used as a heat source, is created by a high supply of energy that makes the shielding gas electrically conductive. The arc is constricted and thereby reaches a higher energy density than during TIG welding. Plasma welding is suitable for all electrically conductive materials.
  - Plasma cutting
    Plasma arc cutting
    Plasma cutting is a arc cutting process in which the arc burns between a non-melting electrode and the material. The heat source is a beam of very hot electrically conductive gas, the so-called plasma beam. Plasma cutting is suitable for all electrically conductive materials. Various cutting gases are used in plasma cutting depending on the requirement and material.
  - Manual metal arc welding (MMAW)
    Arc electrode welding
    Manual metal arc welding is a metal arc welding process (MMAW) in which an electrical arc burns between a sheathed rod electrode and the material. No shielding gas is used in manual metal arc welding. The sheathed melting electrode forms a shielding gas to protect the smelt and supplies additives to create the required seam. Manual metal arc welding can be used on nearly all materials suitable for welding, simply and efficiently. Shielding gas is not supplied but is created – depending on the requirement and material – when the electrode sheath melts. The procedure is also used in small and medium-sized businesses and when building ships, pipelines as well as steel constructions and bridges outdoors.
  - Manual
    Join securely – work effectively
    Manual welding, or welding by hand, is among the most demanding and stressful activities in metal construction. To join materials securely welders frequently have to work for longer periods in so-called constrained positions. To make this possible over a longer period a welding torch is needed that relieves the welder and provides optimal support during work.
  - Automated
    Welding evenly – working economically
    With recurring welding jobs automated welding ensures fast processes, constant high welding quality and, if planned correctly, short amortisation periods. Thanks to technological progress in recent years, automated welding offers clear advantages in comparison with manual welding to SMEs as well. Automated welding can also be realised with different methods.
  - Thin sheet welding
    Ensuring stability – avoiding thermal distortion
    Welding thin plates up to 3 mm thick is one of the most complex joining tasks. The aim is to create a stable connection despite the thin material gauge. To prevent distortion of the metal plate and time-consuming reworking, as little heat as possible needs to be generated on the work surface. This requires lots of experience, finesse and welding equipment that is capable of working precisely in every situation.
  - Thick plate welding
    More efficient welding – improving quality
    Joining thick steel plates like those used to build ships and machines is one of the most complex and difficult welding tasks, and often large tolerance differences and gaps need to be compensated. All parts require careful preparation to ensure permanently stable connections. Also, the required result is often only achieved after several welding processes.
  - Welding large parts
    Wide welds – long distances
    Using optimised welding equipment is essential when welding large parts because the wide welds on the parts, which are usually subject to heavy loads, must remain permanently stable and securely attached. Also, large distances often need to be bridged between the power source and the welding point. The wire and gas supplies need to work reliably and all parameters and various welding programs must be retrievable, if possible by remote control.
  - Health
    Reducing strain – preventing tension
    Welding can impact on health, which is why there is a series of statutory prevention regulations governing released gases and vapours, extreme light and high temperatures. These include the use of extractor systems, mobile extractor devices, fume extraction torches and personal protective equipment. As a leading welding equipment partner, ABICOR BINZEL wants to help welders to reduce the physical stress associated with welding.
  - Research and development
    Using the test laboratory – driving innovations
    ABICOR BINZEL is one of the quality and innovation leaders for welding torches and has made a decisive contribution to shaping the world of welding over many years. ABICOR BINZEL is particularly concerned with continuously improving products, relieving the strain on welders, researching into new processes and supporting automated welding with the objective of developing efficiency-enhancing joining technology solutions. For this reason, developers in the ARClab test laboratory work daily on optimising product solutions and testing new products thoroughly.
  - Process development
    Utilise competence – optimise processes
    ABICOR BINZEL has been a leading specialist for welding technology for over 60 years and works with very different companies, institutes and research institutes. In the Innovation and Technology Centre (ITC) experts from ABICOR BINZEL are available with their whole experience to manufacturing companies across the whole spectrum of industry. They advise and support these companies in developing and optimising their joining technology processes and help them to make their production more economic, more efficient and better.
  - BOMAG GmbH, Boppard, Germany
    Testing the MB EVO PRO: lighter, more flexible and cooler
    BOMAG specialises in machines for compacting earth, asphalt and waste. The global market leader based in Boppard at the Rhein river has around 2500 employees worldwide. ABICOR BINZEL welding torches have been used here for over 30 years for demanding welding tasks in steel construction work. In test operations over several weeks, the new air- and liquid-cooled MB EVO PRO welding torches convinced welders and those responsible straight away.
  - CRIST Offshore Sp. zo.o., Gdynia, Poland
    The specialist for offshore constructions and platforms
    The CRIST shipyard in Gdynia has the longest dry-dock in Poland and specialises in building giant constructions and ships for the offshore sector. About 150 people work in the shipyard's offshore sector. The company has relied on ABICOR BINZEL's flexible welding torches for many years.
  - E & F Metall- und Rohrleitungsbau GmbH, Föhren, Germany
    Stainless and steel – for the highest demands
    E & F is an experienced specialist for metal constructions and pipelines in the foodstuffs and pharmaceutical industries, as well as in other sectors with high quality demands. Over 80 welders work for the company worldwide. Following an intensive test phase, E & F has converted its welding torches to product solutions from ABICOR BINZEL.
  - Kranbau Köthen GmbH, Köthen, Germany
    We take a load off you
    Kranbau Köthen GmbH develops and manufactures individual special, process and automatic cranes. The company was founded in 1934, has around 250 employees and supplies customers all over the world. As a long-term industrial user, Kranbau Köthen also supports ABICOR BINZEL in developing and testing new products and technologies.
  - Remontowa Shipbuilding SA, Danzig, Poland
    Ship conversion and shipbuilding with the highest standards
    The Remontowa shipyard in Gdansk is one of the leading shipyards for ship conversions in Europe. The company was founded in 1952 and carries out over 200 ship repairs and conversions annually. Following a convincing test, the shipyard now uses ABIMIG® A T LW torches from ABICOR BINZEL for all its welding work.
  - SAMSON AG, Frankfurt, Germany
    Valves for measurement and control technology
    SAMSON AG is one of the world's leading appliance manufacturers for measurement and control technology. The company stands for quality technical workmanship, entrepreneurial continuity and great innovative capabilities. In order to realise different manual and automated welding work securely in the desired quality, Samson AG relies on welding torches from ABICOR BINZEL.
  - Gdansk Shipyard SA, Danzig, Poland
    Shipbuilders with a long tradition
    The tradition-steeped Gdansk Shipyard counts flexibility and versatility among its strengths. It demands both from its workforce and their tools. The shipyard relies on welding torches from ABICOR BINZEL to enable its welders to carry out their work optimally.
  - Bronpi Calefacción, Lucena, Spain
    100% tightness for comfortable warmth
    Bronpi Calefacción, based in Lucena, southern Spain, develops and manufactures high-quality fire places, wood burning stoves and pellet heating systems. The company was founded in 1985 and has over 200 employees. Along with Spain, the main sales markets are above all England and other European countries. Bronpi relies completely on ABICOR BINZEL products for welding technology.
  - Gosan S.A., Bilbao, Spain
    Gosan products lift the world
    Since 1971 Gosan has supplied mechanical components for lifting, conveying and storage systems all over the world. The market leader focusses on customised welded sheaves for lifting heavy loads. To ensure that all quality and safety requirements are fulfilled, Gosan uses technology from ABICOR BINZEL for automated and hand welding work.
  - Stahl Maschinenbau GmbH & Co. KG, Perkam, Germany
    Reliable series production of hydraulic tanks
    Stahl Maschinenbau in Perkam, Bavaria, specialises in the development and production of hydraulic and diesel tanks for construction machines, cranes and industrial lifts. The company meets the high standards for quality and series production among other things through the use of robot welding technology from ABICOR BINZEL.
  - WP Performance Systems, Munderfing, Austria
    World-class welding
    WP Performance Systems has already won over 300 world championships. Because in motorcycle racing there's hardly a single professional who does not use frames from the Austrian manufacturer. High-end chassis from WP are regularly found among the leaders both off-road and in road races. One reason: their high quality, which is enabled as well with the help of ABICOR BINZEL welding technology.
  - Fordonsbyggnad och transportsektor
    Perfekt utseende – högsta säkerhet och stabilitet
    I fordonsbyggnadsbranschen och transportsektorn måste svetsfogarna uppfylla extremt höga krav. Beroende på användningsområde ligger fokus på utmattningstid, säkerhet och utseende. Tjocka plåtar används till chassin, tunnplåt och aluminium till lätta karossdelar, och skevningsfritt stål till kupén. ABICOR BINZEL erbjuder fordonsbyggare och deras underleverantörer ett komplett program med svetstekniklösningar för manuella, delmekaniserade och automatiserade svetsprocesser.
  - Allmän tillverkning
    Mångsidiga material – anpassade svetsmetoder
    Från rörledningar till kontorsstolar, från uttagsautomater till berg- och dalbanor. Nästan allt kräver svetsteknik. Lika brett som användningsspektrat är, lika varierande är kraven på svetsare, processer och utrustning. Avgörande för valet av svetsmetod är materialet och dess särskilda egenskaper. ABICOR BINZEL levererar optimala fogtekniklösningar för snart sagt alla material och arbetsuppgifter - manuellt, mekaniserat eller automatiserat.
  - Skeppsbyggnad och offshore
    Robusta krav – många olika svetsuppgifter
    Inom skeppsbyggnad och offshore ställs det mycket höga krav på svetsare och utrustning. Påverkan från väder och vind måste tas med i beräkningen, så även de särskilda egenskaperna hos primade plåtar, skevningsfrihet i stora segment och svetsfogar som kan lackeras utan efterarbete. Svetsarna arbetar ofta i snäva utrymmen och forcerade lägen med många byten av arbetsställning, och de måste klara stora sträckor. ABICOR BINZEL erbjuder anpassade lösningar för handsvetsning och delmekaniserad svetsning samt robotsvetsning.
  - Byggnation
    Stabila förbindningar – delmekaniserade lösningar
    I byggbranschen innebär svetsning i regel sammanfogning av enkelt eller förzinkat byggstål och aluminium. Svetsning sker t.ex. i produktionshallar, på byggarbetsplatser, i hisschakt eller på bryggor. Svetsmetoden väljs utifrån material och tillämpning. Vid manuellt svetsarbete är det viktigt med en lätt och ergonomiskt optimal pistolteknik. Delmekaniserad och automatiserat svetsning, t.ex. inom förproduktion, ställer särskilda krav på svetstekniken.
  - Tung maskinindustri
    Krävande svetsuppgifter – särskild utrustning
    Inom den tunga maskinindustrin krävs kraftfull och flexibel svetsutrustning som stödjer svetsarna i arbetet på ett optimalt sätt. Många gånger måste tjockväggiga, delvis svåråtkomliga komponenter svetsas för hand i forcerade lägen. Svetsfogarna måste klara mycket höga belastningar och uppfylla de robusta kraven. ABICOR BINZEL har ett stort sortiment av effektiva standard- och specialbrännare för delmekaniserad svetsning, samt speciallösningar för automatiserad svetsning, t.ex. vid serietillverkning av moduler.
  - Energi
    Extrema belastningar – särskilda svetslösningar
    Rörledningar och tankar, vindhjul och turbiner, solfångare och sopförbränningsanläggningar: energihantering och apparatkonstruktion har många olika facetter. De allra flesta av dem kräver robusta och säkra svetsfogar. Förutom stål svetsas ofta specialmaterial som klarar mycket höga krav på stabilitet och säkerhet. ABICOR BINZEL har ett stort sortiment av effektiv och ergonomisk svetsutrustning för manuella, delmekaniserade och automatiserade svetsprocesser.
  - Nya teknologier
    Megatrender blir verklighet – med innovativa fogningstekniker
    Sammanfogningstekniken påverkas av ett antal teknologiska utvecklingar. Generativa eller additiva tillverkningsmetoder med metalliska komponenter kräver att särskild svetsutrustning används. Vid produktion av magasin för ackumulatorer för elfordon krävs särskilda lser- och specialfogningsmetoder i mikro- och makroområdet. ABICOR BINZEL har passande lösningar för delmekaniserad och automatiserad produktion med innovativa fogningstekniker, konventionella stål och varierande specialmaterial.
  - Kataloger
    Kataloger
    Reservdelslista
    Översikt brännare
    Brochyrer
  - Bruksanvisningar
    Manual
    ROBOTIC SYSTEMS
    Tillbehör
    Allmänna dokument
  - Informationsblad
    Manual
    ROBOTIC SYSTEMS
    Tillbehör
  - Säkerhetsdatablad
    Svetskemikalier
    Volframelektroder
    Mejslingselektroder
  - Försäkran om överensstämmelse
    Manual
    ROBOTIC SYSTEMS
    Tillbehör
  - Tidskrift WELDER`S WORLD
  - Video Galleri

MIG/MAG Svetspistoler MB ERGO

MIG/MAG Svetspistoler MB ERGO – Den högkvalitativa svetspistolen ...

De beprövade och tillförlitliga svetspistolerna från ABICOR BINZEL har tekniken för problemfri svetsning av alla förekommande applikationer.

Argument som talar för sig själv:

Toppkvalitet
Ergonomisk och tekniskt utvecklad samt 100% pålitlig
Optimal kylning - lång livslängd

MIG/MAG Svetspistoler MB ERGO, luftkyld

Teknisk data (EN 60 974-7):

Typ:	MB ERGO 15 AK / MB ERGO 15 AK-FX	MB ERGO 24 KD	MB ERGO 25 AK / MB ERGO 25 AK-FX	MB ERGO 26 KD	MB ERGO 36 KD
Klassificering
CO₂:	180 A	250 A	230 A	230 A	300 A
Blandade gaser M21*:	150 A	220 A	200 A	200 A	270 A
Intermittensfaktor (%):	60	35	60	35	60
Tråd Ø (mm):	0.6 - 1.0	0.8 - 1.2	0.8 - 1.2	0.8 - 1.2	0.8 - 1.2

Teknisk data (EN 60 974-7):

Typ:	MB 40 KD	RB 61 GD
Klassificering
CO₂:	300 A	450 A
Blandade gaser M21*:	270 A	-
Intermittensfaktor (%):	60	60
Tråd Ø (mm):	0.8 - 1.2	1.6 - 3.2

* enligt DIN EN 439

Klassificeringen är dimensionerad för standard strömkälla med VDE standard volt/amp (U=14+0.05xl). Vid pulssvetsning reduceras intermittensfaktorn med 35%.

MIG/MAG Svetspistoler MB ERGO, vätskekyld

Teknisk data (EN 60 974-7):

Typ:	MB ERGO 240 D	MB ERGO 401 / 401 D	MB ERGO 501 / 501 D
Klassificering
CO₂:	300 A	450 A	550 A
Blandade gaser M21*:	270 A	400 A	500 A
Intermittensfaktor (%):	100	100	100
Tråd Ø (mm):	0.8 - 1.2	0.8 - 1.2	1.0 - 1.6

Teknisk data (EN 60 974-7):

Typ:	MB 602	RB 610 D
Klassificering
CO₂:	600 A	650 A
Blandade gaser M21*:	550 A	-
Intermittensfaktor (%):	100	100
Tråd Ø (mm):	1.0 - 1.6 (2.4)	1.6 - 3.2

* enligt DIN EN 439

Klassificeringen är dimensionerad för standard strömkälla med VDE standard volt/amp (U=14+0.05xl). Vid pulssvetsning reduceras intermittensfaktorn med 35%. Rekommenderad kylningskapacitet av vattencirkulation ca. 800 W.

ABICOR BINZEL Sverige ABRingugnsgatan 4
21616 LimhamnGoogle Maps0046- 40 6 991 750

ABICOR BINZEL World Wide

ABICOR BINZEL Sverige AB

Manual

ROBOTIC SYSTEMS

Tillbehör

Övrigt

Accessories for professionals

For best welding results

Material

Process

Main focus

Accessories for professionals

For best welding results

Join securely – prevent corrosion

Long-lasting connections – outstanding visual appearance

Numerous types – infinite possibilities

Special properties – special applications

Metal inert gas welding

Metal active gas welding

Tungsten inert gas welding

Laser beam welding

Tungsten plasma welding / Plasma metal inert gas welding

Plasma arc cutting

Arc electrode welding

Join securely – work effectively

Welding evenly – working economically

Ensuring stability – avoiding thermal distortion

More efficient welding – improving quality

Wide welds – long distances

Reducing strain – preventing tension

Using the test laboratory – driving innovations

Utilise competence – optimise processes

Manual

Automated

Accessories for professionals

For best welding results

Join securely – prevent corrosion

Long-lasting connections – outstanding visual appearance

Numerous types – infinite possibilities

Special properties – special applications

Metal inert gas welding

Metal active gas welding

Tungsten inert gas welding

Laser beam welding

Tungsten plasma welding / Plasma metal inert gas welding

Plasma arc cutting

Arc electrode welding

Join securely – work effectively

Welding evenly – working economically

Ensuring stability – avoiding thermal distortion

More efficient welding – improving quality

Wide welds – long distances

Reducing strain – preventing tension

Using the test laboratory – driving innovations