Robot Mount CAT3
It’s the switch that makes the difference …
The robot mount CAT3 is used with externally guided welding torch cable assemblies. Due to the deflection of the welding torch in a collision, the welding robot is reliably stopped by the CAT3 integrated switch-off function, which prevents damage to the welding robot and welding torch equipment.
In addition, the precise resetting accuracy allows for a fast resumption of the production process. This means that production downtimes are reduced to a minimum. The CAT3 is a process-oriented development of the established robot mounts CAT2 and CAT2-HL.
The robot mounts CAT2 and CAT2-HL can be easily exchanged with CAT3 without reprogramming the robot.
The wide range of holder and flange accessories always offer the right product solution for your application.
Arguments that speak for themselves:
- Technically sophisticated, robust design
- Simple installation on welding robots
- Compact size for perfect accessibility
- Reliable switching function
- High resetting accuracy minimises line downtimes
- Different spring types available for adjustment to the tool weight
- Excellent protection against contamination
Area of application:
Standard welding robot with cable assembly on the outside
|Dimensions:||Ø 77 mm
Height 106 mm
960 g (without holder and flange)
Deflection in X- and Y-axis: ca. 7°
|Switch point:||Deflection in X- and Y-direction: 1,4°–1,7°
Deflection in Z-direction: 1,3–1,6 mm
|Resetting accuracy:||X-, Y- and Z-direction: ± 0,04 mm
(at 400 mm distance to the robot flange)
|Load capacity safety cut-out:||max. 30 V DC / 100 mA|
45-123 OpoleGoogle Maps0048 (0) 77 466 73 42