Torch Cleaning Station TCS-PP

"Plug & Play …"

The TCS-PP, Torch Cleaning Station offers the complete solution for reliable automatic servicing of the torch neck. Combined in a single station, the 3 point clamping system guarantees optimally timed processes and an increase in available plant floor space. A number of other features such as mounting stand and drip pan reduce installation costs.

1. Torch cleaning station

Precise and effective cleaning for almost all robot welding torches.
Proven and trusted cutter principle, suitable even for heavy spatter adhesion.
3-point clamping of the gas nozzle fixes the torch in place during the cleaning process.

2. Spraying unit "TMS-VI"

Direct, economical spraying of anti-spatter fluid reduces welding spatter adhesion and extends the servicing intervals.
Clean environment thanks to encapsulated spraying nozzle and collecting pan for dirty residual oil.
Simple disposal of residual oil and replenishment of the anti-spatter agent by simply exchanging the bottles.

3. Wire cutting fixture

The combined clamping and shearing action guarantees precise cutting quality and ensures optimum arc-start properties as well as exact TCP measurement.
Long service life thanks to sturdy design.

For the download of the catalogue and the spare parts list as a PDF-file "click" here.

Further information (manual, ordering information etc.) you will find here.

[ back ]

Weight:
  approx. 35 lbs.
Ambient temperature:
  +41ºF up to +122ºF
Protection according to DIN 40050: IP 21

Pneumatic connection - manifold block
Compressed air supply inlet: Pushlock fitting f/10mm OD air hose or G1/4
Air supply hose internal diameter: min. Ø 6mm
Nominal pressure:
  90 psi
Operating pressure:
  80-120 psi

Electrical - terminal block
7 - position screw/quick clamp terminal strip
2 positions - 24 V DC power supply
4 positions - inputs for triggering control valves
1 position - output for "station ready" signal
Cable inlet: PG9
Power consumption:4.5 W

Control requirements
4 robot outputs 24 V DC for triggering station control valves
1 robot input 24 V DC for receiving "station ready" signal

Cleaning station:
Pneumatic motor (nominal speed)
- with lubricated air:
approx. 650 rpm
-with non-lubricated air:
approx. 550 rpm
Air consumption:
approx. 600 L/Min.

Spraying unit
Capacity of the bottle:
1 litre

Wire Cutter
Cutting capacity at 90 psi
- Solid wire:
up to .062"
-Cored wire:
up to .125"
Cutting time:
0.5 sec.