Torch Cleaning Station TCS-6

Keep "clean" ...

The TCS-6 cleans the interior of the gas nozzle at the torch neck precisely and effectively.Thanks to its funtional principle, a maximum amount of weld spatter is removed. Its compact construction and fastening possibility independent of its position make it easy to integrate the device near the robot. The precision and efficiency of the system reduces manual intervention, lengthens service life of the wear parts, and shortens the down-time of the robot.

  • Reset switch, ready light, and TCP pointer
  • Quick change PCB terminals
  • Robust and compact construction
  • Possible to mount in the robot cell independent of its position
  • Exact fixing of the gas nozzle in the clamping head with 4-point support, which means there is no transfer of reaction forces to the axes of the robot
  • Reduces down-time


For the download of the catalogue and the spare parts list as a PDF-file "click" here.

Further information (manual, ordering information etc.) you will find here.

[ back ]

Weight:
  approx. 22 lbs.
Ambient temperature:
  +41ºF to +122ºF
System of protection
according to DIN 40 050:
  IP 21
Category of protection
according to DIN 51 106:
  I

Pneumatic System
Air Connection:
  G1/4"
Air supply hose internal diameter:
  minimal Ø 6mm
 
Nominal pressure:
 90 psi
Operating pressure:
  85 - 120 psi

Electrical terminal
6-position screw/quick clamp quick disconnect terminal strip
2 positions - 24 V DC power supply
2 positions - inputs for "start" 24 V DC or 0V DC
2 positions - outputs for "Station Ready" 24V DC or 0V DC
Cable inlet - PG9
Power consumption -15 W

Control requirements
1 robut output 24 V DC or 0V DC for "Start Signal"
1 robot input 24 V DC or 24 0V DC for "Station Ready" signal

Facebook Linked In