BWC-3 Water-Cooler

Designed for maximum cooling and easy maintenance

... with the recirculating coolant system for water-cooled GTAW Torches and GMAW Guns

BWC Water-Coolers

Cooling capacity for welding torches up to 600 amps
Filter and filler ports are easily accessible on front panel
Easily mounted on trailers or other equipment
On-Off front panel switch
Visible flow indicator
Valve style pump

ABICOOL COOLANT

Year-round protection for Water-Coolers
Lubricates pump and prolongs seals and shaft life
Protects from freezing to -30oF undiluted
Protects from freezing to -10oF diluted two parts coolant to one part distilled water
Protects from freezing up to +10oF dilute one to one
Should be changed annually to maintain maximum protection and lubrication

BWC-3 Flow Switch Hook-up Kit

Protection device for the welding torch
Flow switch is capable of breaking the welding circuit in the event of insufficient or no water flow, preventing damage to the torch from over heating

BWC-3 Waterline Hook-up Kit

For Installation without flow switch

For the download of the catalogue and the spare parts list as a PDF-file "click" here.

Further information (manual, ordering information etc.) you will find here.

[ back ]

BWC-3
IP Rating: 23
Tank contents:
  3 gal (11.4 L)
Maximum Cooling Capacity:
14,000 BTU/hr at
  1.25 qt/min (1.2 L/min)
Dimensions:
23 in (584 mm) long,
12 in (305 mm) wide,
13-1/4 in (337 mm) high
Weight:
  39 lbs (18 kg)

115 Volt models:
Use 5.9 Amperes,
50/60 Hertz,
Single-Phase Input
  Power

230 Volt models:
Use 3 Amperes,
50/60 Hertz,
Single-Phase Input
Power

1/4 HP motor Pump capacity:
1.6 GMP @ 55 psi